Child classes of _R_TAGS must define TAG_LEVEL, but for good style let's
define it also here to at least ensure we don't get a 'Unknown
attribute' exception.

Of course, this also silences a pylint warning.

Reviewed-by: amishchenko

In LUSetInstanceParam we used to save the dict without defaults for the
instance params as hv_inst, but to use the populated one for the
instance (hv_new). Fixing this leads to instances without all the
parameters set.

Reviewed-by: iustinp

The comment is not really true anymore, as we have a lot of parameters
nowadays.

Reviewed-by: iustinp

1) Only instance_name is available
2) There was a missing string parameter

Reviewed-by: iustinp

This was skipped in the previous QA patch.

Reviewed-by: imsnah

In some cases 'mouse' may work better than 'tablet', so we'll handle
both by allowing the user to specify a parameter. By default no mouse is
used.

Reviewed-by: iustinp

With this patch we allow KVM instances to be booted off the network.
The only issue is that this is not compatible with virtio nics, so
we disallow them, when booting from the net.

Reviewed-by: iustinp

When executing the KVM runtime we load the nic type from the runtime
hvparams and use it to specify the nic model type. As for the disk we
translate the DEV_PARAVIRTUAL type to 'virtio'.

Reviewed-by: iustinp

They'll be used to set the nic type when we execute the runtime, since
the nics are processed later. We need to save the hvparams because we
want to use the same one as when we saved the runtime, rather than use
the current instance ones, to avoid applying only some changed
parameters when the runtime is loaded.

Reviewed-by: iustinp

By passing the relevant if= value to the disk we support different disk
types. The only change is that we'll translate "paravirtual" to
"virtio" to keep only one "paravirtualized" value, around ganeti. The
if= value is calculated outside the disks loop, as it's the same for all
disks (as currently ganeti doesn't support per-disk params).

Reviewed-by: iustinp

Copy the message from the KVM one, adding a missing 'the' and a list of
possible values, to help the user in his decision.

Reviewed-by: iustinp

- Add a bunch of NICs and DISKs types
- Specify which one are valid disks and nics for KVM (the new ones
  toghether with some of the old ones)
- Add the default values (paravirtual)
- Allow the disk and nic types as parameters and check their validity

Reviewed-by: iustinp

These are not HVM specific, so have been given an HT generic name.

Reviewed-by: iustinp

The VNC base port has nothing to do with HVM itself, and is general to
VNC itself, so we're removing the HT_HVM prefix to the constant.

Reviewed-by: iustinp

This patch adds a new instance query flag called disk_usage that
retrieves the overall space used by an instance on each of its nodes.
This can be used when balancing the cluster or checking N+1 status.

The flag is also exported in RAPI. Note the flag is currently broken for
file-based instances, as it represents the amount of space in the
cluster volume group.

Reviewed-by: ultrotter

Currently, the names of the functions in backend.py that are actually
RPC procedures and are called from ganeti-noded are not corresponding to
the RPC names. This makes it hard to actually see which functions are
exported and which functions are internal to backend.

This patch renames all blockdevice-related functions in backend.py match
the name of the RPC call (without the ‘call’ or ‘perspective’ prefix).
This should make it easier to grep for a given function called in
cmdlib, without having to open and check in ganet-inoded what backend
function it corresponds to.

The patch also does two minor extra cleanups (rename a variable and
change a logging level).

Reviewed-by: ultrotter

This patch adds two utility functions for raising BlockDeviceError
exceptions and for running functions while ignoring this error. Most of
the manual “raise errors.BlockDeviceError” cases are converted to
_ThrowError, as this makes the code clearer.

We also change most of the DRBD error messages to include the minor
number because with the parallel execution of commands it's not longer
possible to identify the failed DRBD just from the timestamp, and the
minor number can be mapped back to the instance easier.

Reviewed-by: ultrotter

This patch converts the call_blockdev_find - which searches for block
devices and returns their status - to the (status, data) format. We also
modify the backend function name to match the rpc call.

Reviewed-by: ultrotter

This is a hand-picked forward patch of commit 1755 on the 1.2 branch
(hand-picked since the trees diverged too much since then):

    The patch changed the xen hypervisor to compute the number of cpu
    sockets/nodes and enables the command line and the RAPI to show this
    information (for RAPI is enabled by default in node details, for gnt-one
    one can use the new “cnodes” and “csockets” fields).

    Originally-Reviewed-by: ultrotter

For the KVM and fake hypervisors, the patch just exports 1 for both
nodes and sockets. This can be fixed, by looking at the
/sys/devices/system/cpu/cpuN/topology directories, and computing the
actual information, but that should be done in a separate patch.

Reviewed-by: imsnah

This patch fixes the error handling in the add OS to instance function
with regard to invalid OSes. Previously, we didn't handle any such
errors, with the end result that the user would have to look in the node
daemon log.

The patch also renames the name of the function to match the RPC call
name.

Reviewed-by: ultrotter

Currently the return value or errors from the block device Open() method
are ignored. This patch catches any BlockDeviceErrors and returns a
well-formatted result.

Reviewed-by: ultrotter

By using the RemoteFailMsg() or the payload field of RpcResult, we can
simplify a few functions in cmdlib.

Reviewed-by: ultrotter

For results which use the (status, payload) response type, it's easier
to define a ‘payload’ field on the result holding the payload than to
extract it using “data[1]” in the caller code.

Reviewed-by: ultrotter

In lockless queries, it's better if we see the instance in ADMIN_down
rather than ERROR_down during the time it's installed. As such, we
change the LU to only mark the instance 'up' at the time we are ready to
start it.

Reviewed-by: ultrotter

Apparently it's not supported. Also add -boot command line parameters
to kvm, since they seem to help booting from the right place. Everything
will still only work when not using a kernel, but well... :)

Reviewed-by: iustinp

Reviewed-by: iustinp

The cdrom image has the same meaning than in Xen HVM, and so does
boot_order, even though it has a slightly different syntax, and uses the
value 'disk' too boot from disk and 'cdrom' to boot from cdrom.

Reviewed-by: iustinp

Confusingly, as a leftober from 1.2, there was a
constants.HT_HVM_DEFAULT_BOOT_ORDER constant, with a value opposite to
the default HV_BOOT_ORDER hv param that got enabled only if
HV_BOOT_ORDER was set to None. Since setting it to None is very
hard/impossible for the user, and we didn't handle other "empty" values
(False, ''), we'll just force the parameter to have a valid value (after
all we have a default, and that's the way we use hvparams) and get rid
of the old constant altoghether.

Reviewed-by: iustinp

Since we by default now use SSL for RAPI, we need to switch the QA
tests to SSL too.

Reviewed-by: amishchenko

This patch fixes a couple of issues with the job listing:
  - in case of a non-existing job, nicely raise 404 instead of 500
  - in the job detail listing, also list the job log, the job
    timestamps, etc.
  - the opcode migrate instance was missing its description field

Reviewed-by: imsnah

This patch fixes the SSL mode (by actually constructing SSL parameters
from the command line options) and enables SSL by default; the old “-S”
option which enabled SSL is now changed to “--no-ssl”. The certificate
and key are by default pointing to the Ganeti auto-generated certificate
for rapi.

Reviewed-by: imsnah

The start_action function is changed so that it can be called with
arguments - this could be used to parse a defaults file, etc.

Reviewed-by: imsnah

With this parameters VNC for KVM is able to be protected by tls,
optionally with an x509 certificate, and optionally verifying the
client as well. Additionally in this patch we limit the bind address to
being a directory, rather than a file or a directory, for simplicity, as
it allows for the same level of control anyway.

Reviewed-by: iustinp

Before we forced the VNC_BIND_ADDRESS to be an ip. Now we also accept a
path, and bind the instance to it, or to a file in it if it's a
directory.

Reviewed-by: iustinp

This patch converts some more jobs with only queries into cheaper luxi
queries (no job created), and fixes some fallout from the lockless
queries changes.

Reviewed-by: ultrotter

This patch fixes the RAPI QA tests to work with today's RAPI code and
also does some other minor improvements:
  - QA: only create the cluster if so configured (‘create-cluster’ key),
    this allows running parts of the QA suite against existing clusters
  - export the “hvparams” for instances in RAPI

Reviewed-by: imsnah

This patch fixes the 'bulk' parameter (before any non-empty
specification was considered True, in conflict with the documentation,
i.e. bulk=0 still did bulk queries).

The patch also adds optional locking on the instance/node listing (does
not have effect when we only list names).

Reviewed-by: imsnah

This patch cleans up and updates the RAPI interface:
  - queries are changes to luxi queries instead of jobs, where possible
  - since we changed the API version, we remove the old-style attributes
    (sda_size, ip, etc.) and replace them with 2.0 style
  - a small optimization in the instance and node list, don't query
    twice the names in bulk output
  - switch the instance and node lists to no locking

Reviewed-by: imsnah

Similar to the instance list, this patch enables lockless node queris.
“gnt-node list” accepts now the “--sync” flag which enables locking, the
default is lockless.

Reviewed-by: imsnah

For queries, we don't want to require authentication. We fix this by adding an
override GetAuthRealm in the rapi daemon.

We also fix a method name.

Reviewed-by: imsnah