QA for recreate-disk and replace-disks now run also with the default
iallocator.

Signed-off-by: Bernardo Dal Seno <bdalseno@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

"gnt-instance replace-disks" now behaves like the other commands, and uses
the default iallocator when "." is passed as the iallocator parameter.

Signed-off-by: Bernardo Dal Seno <bdalseno@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

Now "gnt-instance recreate-disks" uses the default iallocator when "." is
specified as the iallocator. For uniformity, the same behavior applies to
these commands:
  gnt-node evacuate
  gnt-instance migrate
  gnt-instance add
"." is used instead of "default" becuse the latter could be a valid name for
an iallocator.

Signed-off-by: Bernardo Dal Seno <bdalseno@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

- LoadAllowedFileStoragePaths: Loads a list of allowed file storage
  paths from a file
- CheckFileStoragePath: Checks a path against the list of allowed paths

The unit test for “utils.IsBelowDir” is updated with cases which weren't
tested before.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

First: This enables the use of “gnt-job watch $id” for archived jobs.

Now, the reason for actually making this work is that during
sufficiently large group or node evacuations jobs are archived before
the client gets to poll for their output. This led to situations where
the jobs would finish successfully, but the client reported an error
because it couldn't see the job anymore.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Bernardo Dal Seno <bdalseno@google.com>

Partitioned Ganeti allows to assign node resources in an exclusive manner,
in order to limit interference between instances running on the same nodes.

Signed-off-by: Bernardo Dal Seno <bdalseno@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

If normal file storage was disabled but shared storage enabled,
“_TransformFileStorageDir” would still throw an exception.

in “opcodes._CheckStorageType” there's also a check, but I wasn't quite
sure what the correct way of handling it was, so I added a TODO comment.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

We don't use generators often and lists are easier to re-use.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Bernardo Dal Seno <bdalseno@google.com>

- Don't hardcode node name in some places
- Don't define functions inside functions
- Simplify code for testing with and without offset, this is now in two
  separate tests

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Bernardo Dal Seno <bdalseno@google.com>

This patch adds code to wipe newly added disk space when growing disks
using “gnt-instance grow-disk”. “New disk space” is defined as the delta
between the old block device size (not necessarily equal to the amount
recorded in the configuration) and the new recorded size. Extra caution
is taken to avoid overwriting existing data. Unit tests are included.

A small typo in gnt-cluster(8) (“it's”) is also fixed.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

This is in preparation for adding disk wipe on growing disks.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Bernardo Dal Seno <bdalseno@google.com>

I somehow forgot this in the previous patch.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Bernardo Dal Seno <bdalseno@google.com>

- LogInfo takes *args, no need to replace values right away
- Don't overwrite wipe_chunk_size right after it's been set

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Bernardo Dal Seno <bdalseno@google.com>

This will also be used for verifying the file storage directory.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Bernardo Dal Seno <bdalseno@google.com>

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

The “WriteSsconfFiles” function is used to write ssconf files. By moving
it we can avoid importing backend into bootstrap. The latter is imported
by CLI programs and backend doesn't have much to do with them.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Error messages don't need to say “please” and it's already obvious some
investigation is needed. LogWarning already logs the message using
“logging.error” internally.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Bernardo Dal Seno <bdalseno@google.com>

It is dangerous to have this block size as a global constant as that
could give the impression of it being easily changed. Doing so without
further adjustments to how “dd” is called will lead to disks not being
wiped properly.

Two additional parameter checks are added to “backend.BlockdevWipe”.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Bernardo Dal Seno <bdalseno@google.com>

This fixes issue 190. The problem was that the check for DRBD was
enabled if LVM storage is used and didn't depend at all on whether DRBD
is enabled.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>
Signed-off-by: Michael Hanselmann <hansmi@google.com>

This patch is somewhat longer than was anticipated. Before, commands like
“gnt-instance --help” would exit with the status code 1 (failure). With
this patch, those commands exits with 0 (success) while unknown commands
still print the usage screen and exit with status 1.

To achieve this goal without too much ugly code some refactoring on
cli._ParseArgs was necessary. Printing the version and usage screen was
separated. At the same time this allows for some unit testing.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Bernardo Dal Seno <bdalseno@google.com>

In 2.7 we will only support the Haskell version, if enabled.

Since the original hconfd enabling was a bit hack-ish (copying over
the actual installed ganeti-confd, Python version), the Makefile.am
changes are a bit more involved than just the removal of the Python
code.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Bernardo Dal Seno <bdalseno@google.com>

This will need some more configure.ac checks for required libraries,
which will come later with the Haskell dependencies reorganisation.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

- Add document describing virtual clusters
  - Non-root clusters are not yet described, will be done in another
    patch
- Change title of design document to avoid confusion

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Bernardo Dal Seno <bdalseno@google.com>

libghc-utf8-string-dev was missing.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Bernardo Dal Seno <bdalseno@google.com>

Tests that depend on fakeroot were not distributed in the tarball created
by "make dist" when fakeroot was missing. Now all tests are distributed,
and a warning is printed when a test requires fakeroot but fakeroot is
missing.

Signed-off-by: Bernardo Dal Seno <bdalseno@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

- Generate a wrapper script for ganeti-watcher
- Provide command line option to specify init script

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Bernardo Dal Seno <bdalseno@google.com>

This patch also adds two new parameters to the vcluster-setup script to
not configure /etc/hosts and networking. Build-time variables are now
used for paths.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

The previous commits introduced some pylint errors.

Signed-off-by: René Nussbaumer <rn@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

unsafePerformIO is required to go from the IO monad to pure code.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

This is the CLI part of the OpInstanceMultiAlloc change. There is some
room for improvement especially with user handling, but it works for now
and the code got simplified significantly.

QA tests still needs to be written.

Signed-off-by: René Nussbaumer <rn@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Signed-off-by: René Nussbaumer <rn@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

This is needed, as we're not strictly separating validation from
populating the defaults. We do this all in one function. If we now
receive a non complete OpInstanceCreate opcode in instances, we would
run into AttributeErrors on those.

So we run the validation + recursively on all instances opcodes.

Signed-off-by: René Nussbaumer <rn@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

This code does not need to run as root, therefore it's better to split
it out. It is now run with the same permissions as the master daemon.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Some parts of the code still use a hardcoded user name: root. This patch
replaces all with a constant specified at build time. The end goal is to
make it possible to run a Ganeti cluster without any special privileges
(of course this will prevent some functionality from working).

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Since ERpcError is still not a monad, a simple foldr will have to
do for now.

Signed-off-by: Agata Murawska <agatamurawska@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Signed-off-by: Agata Murawska <agatamurawska@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

parseHttpResponse is such a simple function that we can actually
do the entire unpacking in rpcResultParse.

Signed-off-by: Agata Murawska <agatamurawska@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

For now ERpcError is still not a monad, but we can still simplify
rpcResultFill implementation for different calls simply by abstracting
it into two helpers.

Signed-off-by: Agata Murawska <agatamurawska@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

There is no need (at least right now) for some of the resulting
types to be in additional monad, so let us just have more
"normal" functions.

Signed-off-by: Agata Murawska <agatamurawska@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

As per Iustin's suggestion, this patch aligns parts of typeclass
instance on "=".

Signed-off-by: Agata Murawska <agatamurawska@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>