Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Olivier Tharan <olive@google.com>

* master:
  Update NEWS and version for 2.0.2 release
  Improve the description of node flags in man page
  Change default stripe count to 1
  Use full-stripe size in LVM growth
  RAPI: implement instance reinstall

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

[iustin@google.com: slightly reworded the explanation for offline and
changed the commit message]
Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

This parameter is now mandatory for the cluster config to work.

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

- Check that the enabled hypervisors list is valid
- Check that the master node is a valid node

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

In order not to change the default during a stable series, we modify
configure.ac to default to one stripe, in effect keeping the status quo
(well, minus the LVM Attach() changes).

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

LVM has issues when growing stripped volumes, so it's best to specify
the growth in exact multiples of the full stripe size (as precise as
possible). For this we need to do a couple of changes:
  - in LVM Attach(), we query additionally the VG extent size and the LV
    stripe count; since this makes lvs return a (possibly) multi-line
    output, we now split it into lines and only take the last one
  - in LVM Grow(), we round up the increase in multiples of the full
    stripe size

The patch also sets the correct target size in DRBD growth.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Olivier Tharan <olive@google.com>

It's been replaced by a simpler bootstrap.InitConfig function, which
does the same job, and is currently unused.

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

This function is not used.

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

Currently if a disk is added later the base_index is not considered, and
all the disks are called disk0. This patch fixes it.

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

SimpleStore is a lot less heavyweight than SimpleConfigReader, and to
just get the master name we can use that. This is the only usage of
SimpleConfigReader currently, but we're not going to delete the class,
as new usages will come in for ganeti-confd (in 2.1). Using it there,
though, will make the class even more heavy to load, so it makes sense
for this simple usage to be converted.

Signed-off-by: Guido Trotter <ultrotter@google.com>

This was broken by my pylint fixes patch.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

This patch adds instance reinstall to RAPI, with two optional parameters:
  - ‘os', in order to change the OS on reinstall
  - ‘nostartup’, in order to leave the instance down after reinstall

The call will first shutdown the instance, the reinstall it, and unless
‘nostartup’ has been passed and is equal to 1, it will be started
automatically.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

* master:
  Create a new --no-voting option for masterfailover
  ganeti-masterd: allow non-interactive --no-voting

This allows failing over in certain corner cases, such as a 2 node
cluster with one node down. The man page is also updated to document
this dangerous option and how to recover from this situation.

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

This will be used by ganeti-noded to start ganeti-masterd in a
--no-voting masterfailover.

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

If a user used ^Z to stop the program, poll() in socket.recv would return
EAGAIN due to SIGSTOP. This patch changes luxi.Transport.Recv to ignore EAGAIN.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

With the change to stripped LVs, the actual size of a meta device (which
is small) can be more than we expected (for non-stripped LVs). This
patch increases from 160MB to 1GB the accepted size, and updates the
comment with the rationale behind this change.

Note that we do want even meta devices stripped, since it can increase
metadata update.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Olivier Tharan <olive@google.com>

Currently, when draining nodes we reset their master candidate flag, but
we don't instruct them to demote themselves. This leads to “ERROR: file
'/var/lib/ganeti/config.data' should not exist on non master candidates
(and the file is outdated)”.

This patch simply adds a call to node_demote_from_mc in this case.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

This patch fixes a few node readd issues.

Currently, the node readd consists of two opcodes:
  - OpSetNodeParms, which resets the offline/drained flags
  - OpAddNode (with readd=True), which reconfigures the node

The problem is that between these two, the configuration is inconsistent
for certain cluster configurations. Thus, this patch removes the first
opcode and modified the LUAddNode to deal with this case too.

The patch also modifies the computation of the intended master_candidate
status, and actually sets the readded node to master candidate if
needed. Previously, we didn't modify the existing node at all.

Finally, the patch modifies the bottom of the Exec() function for this
LU to:
  - trigger a node update, which in turn redistributes the ssconf files
    to all nodes (and thus the new node too)
  - if the new node is not a master candidate, then call the
    node_demote_from_mc RPC so that old master files are cleared

My testing shows this behaves correctly for various cases.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

If the config file is missing when the DemoteFromMC() function is
called, it will raise a ProgrammerError. Instead of changing the
utils.CreateBackup() file which is called from multiple places, for now
we only change the DemoteFromMC() function to not call it if the file is
not existing (we rely on the master to prevent race conditions here).

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Olivier Tharan <olive@google.com>

This patch modifies ConfigWriter.GetMasterCandidateStats to allow it to
ignore some nodes in the calculation, so that we can use it to predict
cluster state without some nodes (which we know we will modify, and thus
we should not rely on their state).

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Olivier Tharan <olive@google.com>

Currently the message for extraneous files on non master candidates is
confusing, to say the least. This makes it hopefully more clear.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Olivier Tharan <olive@google.com>

The code for adjusting the candidate pool size was done after the config
update, and this means we triggered the save of the config file without
fixing the candidate pool, which aborts with an error.

The patch just moves it above. The old comment was valid, but we anyway
save the config file in MaintainCandidatePool, so this should be safe.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

This patch adds a ‘role’ node list field, which shows a one-character
node status. This is a simpler way to see the node status than selecting
all the flags individually.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

Currently the http library only checks credentials when authentication
is required. This means that any credentials are accepted on the root
resource, for example, which makes problems hard to diagnose - the
user/pw works for all queries, until one tries to do a modification at
which point fails.

This patch changes the PreHandleRequest() function to not ignore
credentials when passed, even if we don't require authentication. This
makes the behavior of RAPI more predictable.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

The documentation for the reboot was wrong. This patch fixes it and
updates the docstring with more details.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

Currently running “gnt-instance list -o+vcpus” fails with a cryptic message:
  Unhandled Ganeti error: vcpus

This is due to multiple issues:
  - in some corner cases cmdlib.py raises an errors.ParameterError but
    this is not handled by cli.py
  - LUQueryInstances declares ‘vcpu’ as a supported field, but doesn't handle
    it, so instead of failing with unknown parameter, e.g.:
      Failure: prerequisites not met for this operation:
      Unknown output fields selected: vcpuscd
    it raises the ParameteError message

This patch:
  - adds handling of 'vcpus' to LUQueryInstances
  - adds handling of the ParameterError exception to cli.py
  - changes the 'else: raise errors.ParameterError' in the field handling of
    LUQueryInstance to an assert, since it's a programmer error if we reached
    this step

With this, a future unhandled parameter will show:
  gnt-instance list -o+vcpus
  Unhandled protocol error while talking to the master daemon:
  Caught exception: Declared but unhandled parameter 'vcpus'

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

The current check in LUCreateInstance.CheckPrereq() is wrong - it only checks
if we got an OS, but not if we got a valid OS. This patch fixes it.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

The size of the instance's disk was not shown in “gnt-instance info”.
This patch adds it and formats it nicely if possible.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

It was mistakenly called --backend

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Currently we support querying for "mac" "ip" or "bridge", meaning "the
one of the first nic. We are not checking that there is a first nic,
though, and thus could incur in errors. This patch fixes it by returning
"None" should there be no such nic, as it's done when explicitely asking
for a nic via nic.<field>/<N>

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>