Signed-off-by: Stephen Shirley <diamond@google.com>
Reviewed-by: René Nussbaumer <rn@google.com>

This allows calling of _UnlockedLookupNodeGroup() from within
AddNodeGroup()

Signed-off-by: Stephen Shirley <diamond@google.com>
Reviewed-by: René Nussbaumer <rn@google.com>

This adds checking (in the configuration) for invalid be, nd and nic
params. The code is a bit tricky as nd params are at cluster,
nodegroup and node level, nicparams are at cluster and nic level,
whereas beparams are at cluster and instance level.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: René Nussbaumer <rn@google.com>

This just adds a 'cluster' local variable for reducing duplication.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: René Nussbaumer <rn@google.com>

- Add check in ConfigWriter to prevent last node group from being
  removed
- Tidy up error message a bit

Signed-off-by: Stephen Shirley <diamond@google.com>
Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

The LVM queries should only be done for vm_capable nodes. In order to
do this, we also add a new ConfigWriter method to abstract that query.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

This can be set at group creation time and via OpSetGroupParams. The default
is "preferred", and existing node groups from previous Ganeti version will
get the attribute set to this value.

Signed-off-by: Adeodato Simo <dato@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

Currently the code wrongly changes the disk logical/physical id
component representing the path from "$storage_dir/$iname/disk$seq" to
"$storage_dir/$iname/disk/$seq" (note the additional slash) breaking the
rename.

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: René Nussbaumer <rn@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Signed-off-by: Adeodato Simo <dato@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

In particular:

  - add AddNodeGroup and RemoveNodeGroup in config.py

  - refactor _UpgradeConfig to make use of _UnlockedAddNodeGroup

  - add support for objects.NodeGroup in ConfigWriter.Update; add missing
    "serial_no" attribute to NodeGroup objects

  - update NodeGroup.UpgradeConfig to set mtime and serial_no if missing
    (the refactored code in _UpgradeConfig was not settting mtime nor ctime)

Signed-off-by: Adeodato Simo <dato@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

This adds a errors.ECODE_NOENT for OpPrereqError in LookupNodeGroup.

Signed-off-by: Adeodato Simo <dato@google.com>
Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Though code uses "nodegroup" as data member name, strings that will be
read by the user should use "node group" (with a space), since "nodegroup"
is not a word.

Signed-off-by: Adeodato Simo <dato@google.com>
Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Signed-off-by: Adeodato Simo <dato@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

Signed-off-by: René Nussbaumer <rn@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

And fix an error message.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

Note: It appears this has been around since the initial checkin of
TemporaryReservationManager. I have no idea what this could break, so
someone else may want to test this more thoroughly.

Signed-off-by: David Knowles <dknowles@google.com>
Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

This fixes a bug where the ssconf_instance_list file was
not updated after an instance rename.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: René Nussbaumer <rn@google.com>

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

This can be used to compute a node's instances easily, and a small
function to get all non-vm_capable nodes.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

This adds the flag and some initial handling. The rest of the changes,
for cmdlib, come in a separate patch.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

In the context of a node, its group has (at least today) only one
meaning, that is the node's node group. As such, we rename
node.nodegroup to just node.group.

Note: if we want to keep node in there, it should be at least
node_group, for consistency with the other node attributes.

Similarly, we rename the OpAddNode nodegroup attribute to group.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

If the configuration file doesn't denote this node as master, we prevent
startup. This would have detected our previous race condition more
easily, hence we add it as a permanent check.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

This should fix the case where there are two masters that both try to
distribute the configuration file to the cluster. The first one that does so,
will "win" the ownership of the config.data.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

Currently, masterd startup with old software versions is very confusing
for users: we present two tracebacks, with a message in the middle about
"version mismatch". This can lead to users believing that all that needs
to be done is to fix the config file.

This patch attempts to improve this by handling this case in masterd
itself (not in the child), and showing a more friendly message for this
case.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

Forbid nodegroups to be called with a name that matches the UUID regular
expression. Uppercase versions are forbidden as well.

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Since the nodegroups dict is indexed by uuid duplicate names might
happen as a result of bugs. Add a check to prevent them.

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

If a node doesn't have a node group we'll upgrade the config making it
the cluster default. Also the node add and removal operations are
changed to set/clear the node group correctly. Finally we populate the
"members" list of nodegroups on config load with  the value from the
nodes.

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

This function allows a node group to be looked up by name or uuid.
If no nodegroup is specified and only one exists, that one is returned.

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

Since the uuid is immutable the probability of it getting out of sync
between the object and the dict key is very low. Still, checking is
cheap, so we do it to be more sure nothing is wrong.

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

If no node groups exist we'll create a new default empty one.

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Also:
  - reformat the __slots__ declaration of ConfigData
  - call UpgradeConfig on each node groups to handle future upgrades
  - add nodegroups special case in {To,From}Dict
  - add nodegroups to _AllUUIDObjects

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Signed-off-by: René Nussbaumer <rn@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

Since this parameter will be used on all daemon startups, it needs to be
available on all nodes. This is achieved by querying it via ssconf. This
patch additionally adds a getter method to readily retrieve the primary
ip family from a ConfigWriter object.

This patch also disables the 'R0904: Too many public methods' pylint
warning, as it crosses the 50 methods limit.

Signed-off-by: Manuel Franceschini <livewire@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

This patch enables IPv6 name resolution by using socket.getaddrinfo
instead of socket.gethostbyname_ex.

It renames the HostInfo class to Hostname and unifies its use throughout
the code. This is achieved by using static calls where no object is
needed and removes some obsolete code.

For now, we just resolve to IPv4 addresses, but this will change once it
is needed.

Signed-off-by: Manuel Franceschini <livewire@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

This change is needed as we will need to read the primary ip version
cluster parameter before we start the node daemon. The reason is that we
need to know in advance if we bind to the IPv4 or IPv6 any address.

Signed-off-by: Manuel Franceschini <livewire@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>