Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

If a cluster has any non-master-candidate nodes, those don't contain all
files (e.g. config.data). With commit aef59ae7 (March 31st, 2011)
the logic was changed and subsequently verifying a cluster with non-mc
nodes would complain.

This patch fixes this issue by changing the algorithm. It also adds an
additional check for files which shouldn't exist on a machine. A newly
added unittest is included.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

This reverts commit 34aa8b7c. Writing
error messages to stderr would also include backtraces, something we
tried to avoid in the past.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Commit 64c7b383 changed the RPC call for verifying SSH connections.
Unfortunately this case in adding nodes was missed.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

When verifying a group the code would always check SSH to all nodes in
the same group, as well as the first node for every other group. On big
clusters this can cause issues since many nodes will try to connect to
the first node of another group at the same time. This patch changes the
algorithm to choose a different node every time.

A unittest for the selection algorithm is included.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

In the case we submit many pending jobs (> 100) to the masterd, the
JobExecutor 'spams' the master daemon with status requests for the
status of all the jobs, even though in the end it will only choose a
single job for polling.

This is very sub-optimal, because when the master is busy processing
small/fast jobs, this query forces reading all the jobs from
this. Restricting the 'window' of jobs that we query from the entire
set to a smaller subset makes a huge difference (masterd only, 0s
delay jobs, all jobs to tmpfs thus no I/O involved):

- submitting/waiting for 500 jobs:
  - before: ~21 s
  - after:   ~5 s
- submitting/waiting for 1K jobs:
  - before: ~76 s
  - after:   ~8 s

This is with a batch of 25 jobs. With a batch of 50 jobs, it goes from
8s to 12s. I think that choosing the 'best' job for nice output only
matters with a small number of jobs, and that for more than that
people will not actually watch the jobs. So changing from 'perfect
job' to 'best job in the first 25' should be OK.

Note that most jobs won't execute as fast as 0 delay, but this is
still a good improvement.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

If no arguments were specified the “exec_args” variable was “None”,
leading to the command being run as “… ./… None”.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>
Reviewed-by: René Nussbaumer <rn@google.com>

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: René Nussbaumer <rn@google.com>

When “gnt-cluster copyfile” failed it would only print “Copy of file …
to node … failed”. A detailed message is written using logging.error.
Writing error messages to stderr can be helpful in figuring out what
went wrong (the messages also go to the log file, but not everyone might
know about it).

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Also remove a bug note, since hbal can now for a long time directly
execute jobs.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

The change to enforce boolean results for cluster verify group opcode
missed the HooksCallBack, which uses a very ugly 1/0
logic. Furthermore, the logic is wrong, since it unconditionally
resets the verify result to true.

The patch is changed to simply treat hook failures as failures, and do
nothing for offline/nodes.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

This reverts to the old behaviour in Ganeti 2.4 and before.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

This would have detected the issue fixed in the previous patch.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: René Nussbaumer <rn@google.com>

Commit 7fa310f6 (April 1st, 2011) converted the RAPI resource for
shutting down an instance to FillOpCode. Unfortunately it missed the
fact that the shutdown resource gets its parameters as query arguments.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: René Nussbaumer <rn@google.com>

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: René Nussbaumer <rn@google.com>
(cherry picked from commit c6e1a3ee)

Signed-off-by: Michael Hanselmann <hansmi@google.com>

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Some platforms apparently don't support “ln -s”, otherwise Autoconf
wouldn't have AC_PROG_LN_S.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Running pylint 0.24.0 revealed 2 errors and 1 warning. Here is how I
fixed them:

* jqueue.py: silenced E1101
* netutils.py: rewrote the list comprehension using extend()
* watcher/__init__.py: fixed a missing format string parameter

These changes are backwards-compatible with pylint 0.21.1.

Signed-off-by: Andrea Spadaccini <spadaccio@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

- Makefile.am: added QA directory to the paths checked by pep8
- qa/: fixed the reported errors
- Makefile.am: also, added qa_group.py to qa_scripts

Signed-off-by: Andrea Spadaccini <spadaccio@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

This wasn't possible until now.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

In version 0.21, pylint unified all the disable-* (and enable-*)
directives to disable (resp. enable). This leads to a lot of
DeprecationWarning being emitted even if one uses the recommended
version of pylint (0.21.1, as stated in devnotes.rst).

This commit changes all the disable-msg directives to disable.

Signed-off-by: Andrea Spadaccini <spadaccio@google.com>
Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

- str.split("/").pop() should be os.path.basename
- str.split("\n") should be str.splitlines()

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Signed-off-by: Tsachy Shacham <tsachy@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

Conflicts:
	NEWS (trivial)
	configure.ac (trivial)
	daemons/ensure-dirs.in (deleted)

Signed-off-by: René Nussbaumer <rn@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

If a value passed to UnescapeAndSplit ended with a backslash an
exception would be raised:

$ gnt-instance modify -H mem=x\\ inst1.example.com
[…]
    e2 = slist.pop(0)
IndexError: pop from empty list

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Added a step in cluster-merge that removes the cluster IP from the
master node of the mergee clusters.

Signed-off-by: Andrea Spadaccini <spadaccio@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

This utility checks whether the code conforms to PEP8. Some checks had
to be disabled for Ganeti.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

cmdlib: Avoid wrapping using backslash

gnt_group: Avoid ** magic using keyword arguments (the “pep8” tool
doesn't like the inline comment in this case and will complain about
spaces around the “**” operator)

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Until now it would only say that there was a line longer than 80
characters, but not where.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Identified using the “pep8” utility.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Had to break it as well, today! ;)

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

Handle exceptions gracefully when trying to read the command's output.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Andrea Spadaccini <spadaccio@google.com>

Fixed a wrong method name in the last patch.

Signed-off-by: Andrea Spadaccini <spadaccio@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

Signed-off-by: René Nussbaumer <rn@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

This option allows to do a check for running instances on the mergee
clusters instead of stopping them.

Signed-off-by: Andrea Spadaccini <spadaccio@google.com>
Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

Signed-off-by: René Nussbaumer <rn@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

Signed-off-by: Agata Murawska <agatamurawska@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>
(cherry picked from commit b7d7876b)

Conflicts:

	lib/cmdlib.py (easily fixed)

Signed-off-by: René Nussbaumer <rn@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>