Newer
Older
Ganeti quick installation guide
===============================
Please note that a more detailed installation procedure is described in
the :doc:`install`. A glossary of terms can be found in the
:doc:`glossary`.
Software Requirements
Before installing, please verify that you have the following programs:
- `Xen Hypervisor <http://www.xen.org/>`_, version 3.0 or above, if
running on Xen
- `KVM Hypervisor <http://www.linux-kvm.org>`_, version 72 or above, if
running on KVM. In order to use advanced features, such as live
migration, virtio, etc, an even newer version is recommended (qemu-kvm
versions 0.11.X and above have shown good behavior).
- `DRBD <http://www.drbd.org/>`_, kernel module and userspace utils,
version 8.0.7 or above; note that Ganeti doesn't yet support version 8.4
- `RBD <http://ceph.newdream.net/>`_, kernel modules
(``rbd.ko``/``libceph.ko``) and userspace utils (``ceph-common``)
- `LVM2 <http://sourceware.org/lvm2/>`_
- `OpenSSH <http://www.openssh.com/portable.html>`_
- `bridge utilities <http://www.linuxfoundation.org/en/Net:Bridge>`_
- `iproute2 <http://www.linuxfoundation.org/en/Net:Iproute2>`_
- `arping <http://www.skbuff.net/iputils/>`_ (part of iputils)
- `ndisc6 <http://www.remlab.net/ndisc6/>`_ (if using IPv6)
- `Python <http://www.python.org/>`_, version 2.4 or above, not 3.0
- `Python OpenSSL bindings <http://pyopenssl.sourceforge.net/>`_
- `simplejson Python module <http://code.google.com/p/simplejson/>`_
- `pyparsing Python module <http://pyparsing.wikispaces.com/>`_, version
1.4.6 or above
- `pyinotify Python module <https://github.com/seb-m/pyinotify>`_
- `PycURL Python module <http://pycurl.sourceforge.net/>`_
- `ctypes Python module
<http://starship.python.net/crew/theller/ctypes/>`_, if running on
python 2.4 (optional, used for node daemon memory locking)
- `socat <http://www.dest-unreach.org/socat/>`_, see :ref:`note
<socat-note>` below
- `Paramiko <http://www.lag.net/paramiko/>`_, if you want to use
``ganeti-listrunner``
- `affinity Python module <http://pypi.python.org/pypi/affinity/0.1.0>`_,
optional python package for supporting CPU pinning under KVM
- `ElementTree Python module <http://effbot.org/zone/element-index.htm>`_,
if running on python 2.4 (optional, used by the ``ovfconverter`` tool)
- `qemu-img <http://qemu.org/>`_, if you want to use ``ovfconverter``
- `fping <http://fping.sourceforge.net/>`_
- `Python IP address manipulation library
<http://code.google.com/p/ipaddr-py/>`_
- `Bitarray Python library <http://pypi.python.org/pypi/bitarray/>`_
These programs are supplied as part of most Linux distributions, so
usually they can be installed via the standard package manager. Also
many of them will already be installed on a standard machine. On
Debian/Ubuntu, you can use this command line to install all required
packages, except for RBD, DRBD and Xen::
$ apt-get install lvm2 ssh bridge-utils iproute iputils-arping \
ndisc6 python python-pyopenssl openssl \
python-pyparsing python-simplejson \
python-pyinotify python-pycurl socat fping
Note that this does not install optional packages::
$ apt-get install python-paramiko python-affinity qemu-img
If some of the python packages are not available in your system,
you can try installing them using ``easy_install`` command.
For example::
$ apt-get install python-setuptools
$ cd / && sudo easy_install \
affinity
On Fedora to install all required packages except RBD, DRBD and Xen::
$ yum install openssh openssh-clients bridge-utils iproute ndisc6 \
pyOpenSSL pyparsing python-simplejson python-inotify \
python-lxm socat fping
For optional packages use the command::
$ yum install python-paramiko python-affinity qemu-img
If you want to build from source, please see doc/devnotes.rst for more
dependencies.
.. _socat-note:
.. note::
Ganeti's import/export functionality uses ``socat`` with OpenSSL for
transferring data between nodes. By default, OpenSSL 0.9.8 and above
employ transparent compression of all data using zlib if supported by
both sides of a connection. In cases where a lot of data is
transferred, this can lead to an increased CPU usage. Additionally,
Ganeti already compresses all data using ``gzip`` where it makes sense
(for inter-cluster instance moves).
To remedey this situation, patches implementing a new ``socat`` option
for disabling OpenSSL compression have been contributed and will
likely be included in the next feature release. Until then, users or
distributions need to apply the patches on their own.
Ganeti will use the option if it's detected by the ``configure``
script; auto-detection can be disabled by explicitly passing
``--enable-socat-compress`` (use the option to disable compression) or
``--disable-socat-compress`` (don't use the option).
The patches and more information can be found on
http://www.dest-unreach.org/socat/contrib/socat-opensslcompress.html.
Haskell requirements
~~~~~~~~~~~~~~~~~~~~
Starting with Ganeti 2.7, the Haskell GHC compiler and a few base
libraries are required in order to build Ganeti (but not to run and
deploy Ganeti on production machines). More specifically:
- `GHC <http://www.haskell.org/ghc/>`_ version 6.12 or higher
- or even better, `The Haskell Platform
<http://hackage.haskell.org/platform/>`_ which gives you a simple way
to bootstrap Haskell
- `json <http://hackage.haskell.org/package/json>`_, a JSON library
- `network <http://hackage.haskell.org/package/network>`_, a basic
network library
- `parallel <http://hackage.haskell.org/package/parallel>`_, a parallel
programming library (note: tested with up to version 3.x)
- `bytestring <http://hackage.haskell.org/package/bytestring>`_ and
`utf8-string <http://hackage.haskell.org/package/utf8-string>`_
libraries; these usually come with the GHC compiler
- `deepseq <http://hackage.haskell.org/package/deepseq>`_
Some of these are also available as package in Debian/Ubuntu::
$ apt-get install ghc6 libghc6-json-dev libghc6-network-dev \
libghc6-parallel-dev libghc6-deepseq-dev
Or in newer versions of these distributions (using GHC 7.x)::
$ apt-get install ghc libghc-json-dev libghc-network-dev \
libghc-parallel-dev libghc-deepseq-dev \
libghc-utf8-string-dev
In Fedora, they are available via packages as well::
$ yum install ghc ghc-json-devel ghc-network-devel \
ghc-parallel-devel ghc-deepseq-devel
If using a distribution which does not provide them, first install
the Haskell platform. You can also install ``cabal`` manually::
$ apt-get install cabal-install
Then install the additional libraries via
$ cabal install json network parallel utf8-string
The compilation of the htools components is automatically enabled when
the compiler and the requisite libraries are found. You can use the
``--enable-htools`` configure flag to force the selection (at which
point ``./configure`` will fail if it doesn't find the prerequisites).
Haskell optional features
~~~~~~~~~~~~~~~~~~~~~~~~~
Optionally, more functionality can be enabled if your build machine has
a few more Haskell libraries enabled: RAPI access to remote cluster from
htools (``--enable-htools-rapi``), the ``ganeti-confd``
daemon (``--enable-confd``) and the monitoring agent
(``--enable-monitoring``). The list of extra dependencies for these is:
- `curl <http://hackage.haskell.org/package/curl>`_, tested with
versions 1.3.4 and above
- `hslogger <http://software.complete.org/hslogger>`_, version 1.1 and
above (note that Debian Squeeze only has version 1.0.9)
- `Crypto <http://hackage.haskell.org/package/Crypto>`_, tested with
version 4.2.4
- `text <http://hackage.haskell.org/package/text>`_
- `hinotify <http://hackage.haskell.org/package/hinotify>`_
- `regex-pcre <http://hackage.haskell.org/package/regex-pcre>`_,
bindings for the ``pcre`` library
- `attoparsec <http://hackage.haskell.org/package/attoparsec>`_
- `vector <http://hackage.haskell.org/package/vector>`_
These libraries are available in Debian Wheezy (but not in Squeeze, with
the exception of curl), so you can use either apt::
$ apt-get install libghc-hslogger-dev libghc-crypto-dev libghc-text-dev \
libghc-hinotify-dev libghc-regex-pcre-dev libghc-curl-dev \
libghc-attoparsec-dev libghc-vector-dev
$ cabal install hslogger Crypto text hinotify regex-pcre curl \
The most recent Fedora doesn't provide ``curl``, ``crypto``,
``inotify``. So these need to be installed using ``cabal``, if
desired. The other packages can be installed via ``yum``::
$ yum install ghc-hslogger-devel ghc-text-devel \
ghc-regex-pcre-devel
.. _cabal-note:
.. note::
If one of the cabal packages fails to install due to unfulfilled
dependencies, you can try enabling symlinks in ``~/.cabal/config``.
Make sure that your ``~/.cabal/bin`` directory (or whatever else
is defined as ``bindir``) is in your ``PATH``.
Installation of the software
----------------------------
To install, simply run the following command::
$ ./configure --localstatedir=/var --sysconfdir=/etc && \
make && \
make install
This will install the software under ``/usr/local``. You then need to
copy ``doc/examples/ganeti.initd`` to ``/etc/init.d/ganeti`` and
integrate it into your boot sequence (``chkconfig``, ``update-rc.d``,
etc.).
Before initialising the cluster, on each node you need to create the
following directories:
- ``/etc/ganeti``
- ``/var/lib/ganeti``
- ``/var/log/ganeti``
- ``/srv/ganeti``
- ``/srv/ganeti/os``
- ``/srv/ganeti/export``
.. vim: set textwidth=72 syntax=rst :
.. Local Variables:
.. mode: rst
.. fill-column: 72
.. End: