If no function to verify the result was specified, qa_rapi._DoTests
wouldn't return the result.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

“gnt-backup export” requires the target node. Until now, the master
daemon would complain that the “parameter
'OP_BACKUP_EXPORT.target_node' fails validation”. With this patch,
an additional check is done in the client program.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Manuel Franceschini <livewire@google.com>

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Most (all?) of our commands use dash-separator: replace-disks,
verify-disks, add-tags, etc. “gnt-cluster masterfailover” is an old
exception to this rule.

The patch replaces it with master-failover, add a compatiblity alias,
and updates the documentation for this change.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: René Nussbaumer <rn@google.com>

Use RFC 5737 IP addresses and RFC 2606 domain names in all
unittests, docs, qa and docstrings.

Signed-off-by: Manuel Franceschini <livewire@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

This introduces a new instance status field, named "oper_vcpus".
It contains the actual number of VCPUs an instance is using as
seen by the hypervisor.

Signed-off-by: Balazs Lecz <leczb@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

After some more investigation, only the soft reboot type fails for Xen
3.4 (due to the reboot/uptime time counter). As such, it's better to
allow selective testing, since we do want to test in general these
opcodes/the command line script.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Luca Bigliardi <shammash@google.com>

Since we have seen cases where (repeated) reboots are not supported
(e.g. Xen 3.4+), we need to be able to control this in the QA
configuration.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

Since we have seen cases where (repeated) reboots are not supported
(e.g. Xen 3.4+), we need to be able to control this in the QA
configuration.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

After commit 725ec2f1 they are unused.

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

Currently the RAPI client uses the urllib2 and httplib modules from
Python's standard library. They're used with pyOpenSSL in a very fragile
way, and there are known issues when receiving large responses from a RAPI
server.

By switching to PycURL we leverage the power and stability of the
widely-used curl library (libcurl). This brings us much more flexibility
than before, and timeouts were easily implemented (something that would
have involved a lot of work with the built-in modules).

There's one small drawback: Programs using libcurl have to call
curl_global_init(3) (available as pycurl.global_init) while exactly one
thread is running (e.g. before other threads) and are supposed to call
curl_global_cleanup(3) (available as pycurl.global_cleanup) upon exiting.
See the manpages for details. A decorator is provided to simplify this.

Unittests for the new code are provided, increasing the test coverage of
the RAPI client from 74% to 89%.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

We need to pass the secondary node name, not a dict, which is an invalid
value.

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

Because we have to. :)

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Fix the sentence to say what it means.

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

This test moves an instance on the same cluster and, if successful,
moves it back. While not testing a real move between two clusters,
this is certainly better than nothing.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

Two new resources are added:
- /2/instances/$name/prepare-export
- /2/instances/$name/export

The documentation for the existing resource for creating instances is updated
for remote imports. The RAPI client is extended for the new resources.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

The RAPI tests will depend on the certificate.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

- Add support for sending JSON-encoded body to RAPI daemon
  (required to test more complex resources)
- Expand names when testing resources against config

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

With this, the burnin sequence on big clusters should be (much?) faster.
The patch also fixes the parallel setting (before it was always
enabled).

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

Just using “echo” would use whatever umask is set in the shell,
in addition to potentially showing the password in the process
list.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: René Nussbaumer <rn@google.com>

Since the original instance still exists, we need to use a different MAC
for its NIC.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

Signed-off-by: René Nussbaumer <rn@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

This patch makes sure that the Ganeti RAPI credentials are setup,
if any, on cluster init time.

Signed-off-by: René Nussbaumer <rn@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

* This also adds support for authenticated RAPI calls
* Other HTTP methods than GET/POST

Signed-off-by: René Nussbaumer <rn@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

Information exchanged between different clusters via untrusted
third parties (e.g. for remote instance import/export) must be
signed with a secret shared between all involved clusters to
ensure the third party doesn't modify the information.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Currently, the ganeti-confd's HMAC key is called “cluster HMAC key” or
simply “HMAC key” everywhere. With the implementation of inter-cluster
instance moves, another HMAC key will be introduced for signing critical
data. They can not be the same, so this patch clarifies the purpose of the
“cluster HMAC key” by renaming it. The actual file name is not changed.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

The new test depends on the drbd type tests being enabled, and test
conversion to plain and back to drbd.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

Recent changes to “gnt-cluster verify” made it complain on expiring SSL
certificates. While it was possible to replace the SSL certificates and
other cluster secrets manually before, doing so was cumbersome. Cluster
certificates, keys and secrets can now be replaced easily.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

This adds basic qa tests for gnt-os modify

Signed-off-by: René Nussbaumer <rn@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

When not initialising the cluster, consider all nodes are added, so that
multi-node tests (e.g. export, replace) work correctly (if there are
nodes, of course).

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>