For example, the “initrd_path” parameter is only available with xen-pvm,
whereas “boot_order” is only available with xen-hvm.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

This patch only touches comments and man pages.

Signed-off-by: Bernardo Dal Seno <bdalseno@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Commit f346a7d9 broke the TestInstanceImport test in QA, since it
dropped the "always generate" parameter for backup import. We add an
override mac parameter so that, no matter what is defined in the
config file, imported instances (can) have a different MAC.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: René Nussbaumer <rn@google.com>

In some QA environments static MAC addresses must be used.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Some tests had wrong assumptions on the instance status and some
needed explicit start or stop commands.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Start using “InstanceCheck” decorator where appropriate. Use direct call
for check in places where the instance status changes during the test.

The parameters of “TestInstanceImport” had to be re-ordered to have the
instance as the first argument.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

This solves one case where locks are acquired during LUXI queries.
Pretty late into the transition I noticed that OpBackupQuery had a
“use_locking” parameter for a long time, but didn't use it. Since
most of the other changes were already and this allows exports to
be listed via RAPI (/2/query) I decided to finish.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

With this patch marking an instance already marked offline (or online)
as offline/online again becomes a no-op. Also removed the unused
INSTANCE_UP variable.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Instead of having two separate parameters, a single boolean parameter is
used. Unfortunately we need a third state to say “no change”, so the
value can be None, True or False (similar to other parameters). There
are no user interface changes.

New QA tests are added, too.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

After looking again at the QA speeds, it turned out that instance
rename was run 12 times via the command line and 12 times via RAPI;
outside of start/stop which we need for maintenance during QA, this is
the most used test.

This patch does a few changes with regard to instance rename:

- it changes rename functions to rename the instance back to the
  original name
- which allows us not to run said functions twice, A→B and then B→A

This brings down the number of rename tests from 12 to 8 (for both
cmdline and RAPI).

Furthermore, the CLI rename test was doing too many actual instance
renames (at Ganeti level), so we rework it to be simpler (brings down
the average duration from ~27s to ~21s), and we reorganise the run of
various tests such that we do fewer instances start/stop tests (10
instead of 14).

Overall we only gain about 3 minutes (~7%), but still it's a speedup.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: René Nussbaumer <rn@google.com>

Signed-off-by: Bernardo Dal Seno <bdalseno@google.com>
Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

test modification of either parameter, but also both at once.

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

In version 0.21, pylint unified all the disable-* (and enable-*)
directives to disable (resp. enable). This leads to a lot of
DeprecationWarning being emitted even if one uses the recommended
version of pylint (0.21.1, as stated in devnotes.rst).

This commit changes all the disable-msg directives to disable.

Signed-off-by: Andrea Spadaccini <spadaccio@google.com>
Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

s/'/"/ in (hopefully) the right places.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

Signed-off-by: René Nussbaumer <rn@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Previously we failed later with a rather useless error message. This
patch fixes this and tells the user to activate-disks if replace-disks
is in the need of activated disks rather than abort with a cryptic error
message.

Signed-off-by: René Nussbaumer <rn@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

There's a problem if you run gnt-instance rename with a non FQDN and the
renamed LU tries to resolve the hostname to make it FQDN. It could be
that this resolved hostname was just a CNAME to another name which leads
to wrongly renamed instances name.

Given a name of "foobar" is a CNAME to "moohost" now if you gonna rewrite an
instance named "foobar1" to "foobar" it will pickup the host "moohost".
This is not obvious behaviour. If we detect this case we abort with a
prereq error. The user then however can continue with a FQDN and
--no-name-check if he intends to force the operation.

Signed-off-by: René Nussbaumer <rn@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

This patch starts the instance when gnt-instance reboot is invoked on a
instance already stopped.

Signed-off-by: René Nussbaumer <rn@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

Right now, the QA code is not covered by pylint, and this shows at
least one low-impact bug.

This patch does the necessary changes to make QA pylint-clean, and the
changes the makefile to run pylint for it.

Notable changes:

- qa_utils.GenericQueryTest: randfields was not used at all, and my
  belief is that it was indented to be used in order not to modify the
  input list; so I replaced randfields with fields, so we only shuffle
  the our local copy
- qa_node.TestOutOfBand was using it's own copy of AcquireNode(), so I
  replaced it with the existing version
- qa_os: was using 'dir' in a couple of places, replaced with dirname

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: René Nussbaumer <rn@google.com>

- Query all known fields
- Random combinations (using a PRNG with a fixed seed) of fields
- Order of result names

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

The current instance rename qa testing function can only perform
back-and-forth renames, both for command line and rapi. In order to be
able to perform same-name rename tests we change it to be able to
perform simple renames, and then we change qa to call it to perform both
sides of the renaming.

The same change is applied both to the local and the rapi test.

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Currently, 95% of the QA commands are executed in the same way: on the
master, based on a command list and with expectancies for succes:

    AssertEqual(StartSSH(master['primary'],
                         utils.ShellQuoteArgs(cmd)).wait(), 0)

The rest 5% are variations on this theme (maybe the command needs to
fail, or the node is different, etc.). Based on this, we can simplify
the code significantly if we abstract the common theme into a new
AssertCommand() function. This saves ~250 lines of code in the QA suite,
around 8% of the entire QA code size.

Additionally, the output was very cryptic before (the famous "QA error:
1 != 0" messages), whereas now we show a clear error message (node,
command, exit code and failure mode).

The patch replaces single quotes with double quotes in all the parts of
the code that I touch; let me know if that's not OK…

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

This test would've caught the bug fixed in the previous patch.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: René Nussbaumer <rn@google.com>

… instead of an object. Allows it to be used in places where
only the name is available.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: René Nussbaumer <rn@google.com>

“gnt-backup export” requires the target node. Until now, the master
daemon would complain that the “parameter
'OP_BACKUP_EXPORT.target_node' fails validation”. With this patch,
an additional check is done in the client program.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Manuel Franceschini <livewire@google.com>

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

After some more investigation, only the soft reboot type fails for Xen
3.4 (due to the reboot/uptime time counter). As such, it's better to
allow selective testing, since we do want to test in general these
opcodes/the command line script.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Luca Bigliardi <shammash@google.com>

We need to pass the secondary node name, not a dict, which is an invalid
value.

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

Since the original instance still exists, we need to use a different MAC
for its NIC.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

The new test depends on the drbd type tests being enabled, and test
conversion to plain and back to drbd.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

In Ganeti 1.2, “none” was used to signify no initrd. In 2.0 we have
changed to “no_” as a prefix (i.e. “-H no_initrd_path”) and thus we
document in the manpage this.

The QA suite is changed accordingly.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

There are still issues, especially with "gnt-instance modify" and
resetting values. However, this is a start.

Reviewed-by: ultrotter

To my knowledge they're used nowhere and it's at least slightly
confusing to people adding new QA checks.

Reviewed-by: ultrotter

- Failover back to original node in instance failure test
- Exclude secondary node from list of potential nodes in
  replace-disks test

Reviewed-by: iustinp