Also bump up the version.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: René Nussbaumer <rn@google.com>

Hopefully this can be fixed before the final 2.4 release…

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: René Nussbaumer <rn@google.com>
Reviewed-by: Stephen Shirley <diamond@google.com>

Currently, the export timeout is 10 times 20 seconds, but the import
is only 30 seconds. I'm raising this to 60 seconds with two goals in
mind:

- when debugging manually, this allows for easier synchronisation of
  the processes
- 60 equals to 3 full 20 second intervals, which I think is better
  than just one an a half

This change shouldn't make a big difference either way (at most, it
will possibly delay the job in case of failures by half a minute).

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

In case of failures, the recent daemon output is logged as %r on a
list of unicode strings, which results in the (ugly):

Thu Feb  3 05:13:34 2011 snapshot/0 failed to send data: Exited with status 1 (recent output: [u'  DUMP: Date of this level 0 dump: Thu Feb  3 05:13:18 2011', u'  DUMP: Dumping /dev/mapper/6369a5f7-1e67-4d0d-a4f0-956b3649c6d7.disk0_data.snap-1 (an unlisted file system) to standard output', u'  DUMP: Label: none', u'  DUMP: Writing 10 Kilobyte records', u'  DUMP: mapping (Pass I) [regular files]', u'  DUMP: mapping (Pass II) [directories]', u'  DUMP: estimated 54301 blocks.', u'  DUMP: Volume 1 started with block 1 at: Thu Feb  3 05:13:19 2011', u'  DUMP: dumping (Pass III) [directories]', u'  DUMP: dumping (Pass IV) [regular files]', u'socat: E SSL_write(): Connection reset by peer', u"dd: dd: writing `standard output': Broken pipe", u'  DUMP: Broken pipe', u'  DUMP: The ENTIRE dump is aborted.'])

This patch joins this list and makes it a non-unicode string, thus
resulting in the more readable (and ~10% shorter):

Thu Feb  3 05:16:04 2011 snapshot/0 failed to send data: Exited with status 1 (recent output:   DUMP: Date of this level 0 dump: Thu Feb  3 05:15:58 2011\n  DUMP: Dumping /dev/mapper/6369a5f7-1e67-4d0d-a4f0-956b3649c6d7.disk0_data.snap-1 (an unlisted file system) to standard output\n  DUMP: Label: none\n  DUMP: Writing 10 Kilobyte records\n  DUMP: mapping (Pass I) [regular files]\n  DUMP: mapping (Pass II) [directories]\n  DUMP: estimated 54350 blocks.\n  DUMP: Volume 1 started with block 1 at: Thu Feb  3 05:15:59 2011\n  DUMP: dumping (Pass III) [directories]\nsocat: E SSL_write(): Connection reset by peer\ndd: dd: writing `standard output': Broken pipe\n  DUMP: Broken pipe\n  DUMP: The ENTIRE dump is aborted.)

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

This adds a message and nice handling of ^C, especially useful for
``gnt-job watch``.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

* devel-2.3:
  backend: Disable compression in export info file

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

The new import/export infrastructure in Ganeti 2.2 and up handles
compression differently. It no longer writes compressed files to the
destination. Unfortunately changing this behaviour would be non-trivial,
so in the meantime setting “compression = none” will hopefully avoid
some confusion.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>
Reviewed-by: René Nussbaumer <rn@google.com>

This function can be used from a SIGHUP handler to reopen log files.
Initial, simple unittests are included.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: René Nussbaumer <rn@google.com>

It's passed in by most users (daemons, CLI scripts) and for the others
(burnin, watcher) it certainly doesn't hurt, especially when using
syslog.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: René Nussbaumer <rn@google.com>

The I/O error will occur while opening the file, not while adding
and configuring the handler.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: René Nussbaumer <rn@google.com>

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: René Nussbaumer <rn@google.com>

- Use constant for exit value
- Configure logging from main function, not from class' “__init__”

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: René Nussbaumer <rn@google.com>

Instead of using its own, burnin can use cli.SetGenericOpcodeOpts.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: René Nussbaumer <rn@google.com>

Signed-off-by: Stephen Shirley <diamond@google.com>
Reviewed-by: René Nussbaumer <rn@google.com>

Signed-off-by: Stephen Shirley <diamond@google.com>
Reviewed-by: René Nussbaumer <rn@google.com>

This allows calling of _UnlockedLookupNodeGroup() from within
AddNodeGroup()

Signed-off-by: Stephen Shirley <diamond@google.com>
Reviewed-by: René Nussbaumer <rn@google.com>

Also fix type of Merger.cluster_name from list to string. This would
have triggered an error in sshRunner if cluster keys were in use.

Signed-off-by: Stephen Shirley <diamond@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

Signed-off-by: Stephen Shirley <diamond@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

flatten is the verb, flattened is the adjective.

Signed-off-by: Stephen Shirley <diamond@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

This patch adds a new log handler class based on the standard library's
BaseRotatingHandler. This new class allows the log file to be re-opened,
e.g. upon receiving a SIGHUP signal. The latter will be implemented in
forthcoming patches. The patch does not change the behaviour regarding
writing to /dev/console.

Quite a bit of code had to be changed to unittest the log handlers.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

This patch implements recreation of instance disk symlinks when the
activate-disks operation is run. Until now, it was not possible to
re-create these symlinks without stopping and starting or migrating an
instance as the RPC call where this is done was in instance startup
and migration.

In order to do this, the blockdev_assemble rpc call needs the disk
index too, which is added to the protocol. This is a change from 2.3
and makes instance startup incompatible (FYI).

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

This makes it possible to get the console information via a LUXI query.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Signed-off-by: Stephen Shirley <diamond@google.com>
Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

This adds checking (in the configuration) for invalid be, nd and nic
params. The code is a bit tricky as nd params are at cluster,
nodegroup and node level, nicparams are at cluster and nic level,
whereas beparams are at cluster and instance level.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: René Nussbaumer <rn@google.com>

This just adds a 'cluster' local variable for reducing duplication.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: René Nussbaumer <rn@google.com>

Closes issue: 130

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

- Add check in ConfigWriter to prevent last node group from being
  removed
- Tidy up error message a bit

Signed-off-by: Stephen Shirley <diamond@google.com>
Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

If for some reason (e.g. failed migration) one instance is running
on multiple nodes the output can become inconsistent. To get that error
and make it consistent between runs we make the call on the secondary
too and look if it's running there. If so we report the instance as
ERROR_wrongnode.

Signed-off-by: René Nussbaumer <rn@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Add “cluster-oob” to sample configuration file. Don't run RAPI group
tests if disabled.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

* devel-2.3:
  Wait for master to become available on initialization
  Start all daemons on cluster initialization
  Clarify job processing order in admin guide
  Improve option descriptions
  Remove two unused variables
  Fix LUOSDiagnose and non-vm_capable nodes
  Rephrasing two error messages for auto promotion
  storage: Check that mapper is either used or None
  Fix bug in “gnt-node list-storage”
  Improve import/export timeout settings
  Increase remote import/export timeout

Conflicts:
	lib/constants.py: Trivial
	lib/objects.py: Trivial
	qa/qa_node.py: Trivial

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Currently, the validity of the hypervisor parameters is only checked
at init/modification time, and not in the cluster verify. This is bad,
as it can lead to inconsistent state that is only detected when the
next modification (which can be unrelated) is made, leading to
unexpected error messages.

This patch adds both syntax verification (in masterd) and validity
verification on remote nodes. The downside of the patch is that on
clusters with many instances which have custom parameters, it will be
slow. A possible improvement would be to detect duplicate, identical
set of parameters, and collapse these into a single verification, but
that is left as a TODO (in case it becomes problematic).

An additional change is in utils.ForceDict, where we said 'key',
whereas this function is always used with parameter dicts, so I
changed it to "Unknown parameter".

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

- Remove the actual code
- Remove mentions of it from iallocator.rst, and use hail instead
- Also remove mentions of "etch-image" and use "debootstrap+default"
- Mention htools as the reference implementation in iallocator.rst

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: René Nussbaumer <rn@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Signed-off-by: Stephen Shirley <diamond@google.com>
Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

cli._RunWhileClusterStoppedHelper.Call passes (self, *args) to functions
called via cli.RunWhileClusterStoppedHelper(). The code in cluster-merge
was broken by commit d8aab233.

Signed-off-by: Stephen Shirley <diamond@google.com>
Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Commit 70b0d2a2 broke unittests on Python 2.4 and 2.5. Turns out that
Python 2.6 and above allow classes to be passed as custom test runners,
whereas earlier versions don't.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: René Nussbaumer <rn@google.com>

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: René Nussbaumer <rn@google.com>