When confd is disabled we don't want to be noticed every timer interval.

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

Rather than quitting we'll just continue to poll the config at a slow
rate, hoping that sooner or later we'll get it back. This allows also
working on non-MC nodes, and smoothly transitioning from MC to non-MC,
other than dealing with a few temporary breakages.

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

This allows us not to enable the inotify handler immediately, and thus
to make it easier for us should the config file not exist at all.

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

This is a state the processor will get in, if it fails to load the
config.

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

This will be useful to make ConfdProcessor aware of a config failure,
without quitting confd.

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

In a case we don't encounter frequently (file modified but not
overwritten) the notify handler we use is called with a wrong name.

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Timers are used both for checking for inotify failures, and for polling,
should inotify notices become too frequent.

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

Rather than raising ConfdFatalError directly
ConfdInotifyEventHandler.enable raises InotifyError should it not be
able to configure inotify, allowing the caller to decide what to do.

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

ConfdInotifyEventHandler used to reload the config whenever a
notification arrived. Moving to a callback system, so that
ConfdConfigurationReloader can be responsible for that functionality.

Additionally the inotify class no longer reenables itself automatically,
but just notifies the callback if it's been disabled, and waits for its
call to enable(). This allows, should ConfdConfigurationReloader decide
it wants to move to polling, to avoid having a double enable()/disable()
call.

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

This class will be responsible for managing inotify notifications,
timers, and rate-limiting reloads. For now none of these features is
implemented. :)

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

Make possible to enable and disable the inotify event handler.  The
inotify handler will remain enabled, unless explicitely told to disable
itself.

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

Currently the luxi error handling is hardcoded as special encoding on
the masterd-side and special decoding on the client side. This patch
moves it to errors.py such that other parts of the code can reuse the
same encoding.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

This can be used during maintenance work.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

One shouldn't fork a Python process after using threads. Master
voting is done before forking (utils.Daemonize), but it also uses
threads. Hence it's now called from a separate process.

This patch also fixes the check function to actually exit if
the current machine is not the master (introduced in 04ccf5e9).

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

This will be used to do the master voting.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

This uses a simple 'dd if=… | ssh $target dd of=…' method, like the
ExportSnapshot (which uses the OS export; here we want full disk-level
copy and not any FS-level changes).

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

Now that mainloop is asyncore-enabled we can easily do that.

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

confd.server and daemons/ganeti-confd import a few modules they don't
actually use. Clean them up.

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Signed-off-by: Guido Trotter <ultrotter@google.com>

ganeti-confd is a simple asynchronous daemon, which listens on a UDP
port, passes each packet to a processor, and sends back to the client
the result.

It also listens on an inotify socket, in order to reload its
configuration when the ganeti config file changes.

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

This patch changes the return type for backend.BlockdevGetmirrorstatus from
a list of tuples to a list of objects.BlockDevStatus instances.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

This patch changes the return type for backend.BlockdevFind to an object
(objects.BlockDevStatus). Before a tuple was used. Adding more values to
this tuple causes a lot of work.  Converting the result to an object with
properties will make this a bit simpler.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

Note that this exports the disk size as bdev returns it, in bytes. The
value will be converted to MiB in cmdlib.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

When the parameter is set to True and start_daemons is also True,
ganeti-masterd will be started with the new --no-voting --yes-do-it
options.

This new option is set to True only on masterfailover, when no_voting is
used. This changed the behavior from 2.0, where we didn't start the
master daemon at all, when this option was used.

The manpage is also updated to remove the 2.0 only change.

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Signed-off-by: Guido Trotter <ultrotter@google.com>

With three ganeti daemons, and one or two more coming, the daemon's main
function started becoming too much cut&pasted code. Collapsing most of
it in a daemon.GenericMain function. Some more code could be collapsed
between the two http-based daemons, but since the new daemons won't be
http-based we won't do it right now.

As a bonus a functionality for overriding the network port on the
command line for all network based nodes is added.

Signed-off-by: Guido Trotter <ultrotter@google.com>

The <DAEMON>_PID constants were created to reference a daemon pid file,
but actually contain a daemon's name, because the various functions that
work with pidfiles abstract the filename from the daemon name
themselves. Removing the constants and using the actual daemon name
constants in their place.

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

The original LOG_<DAEMON_NAME> constants for daemon logfiles are gone.
In their place there is a DAEMONS_LOGFILES dict, indexed by daemon name.

This is a minor change with the objective to uniform most of the
daemon's main() functions code, which is very similar one to the other.

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

Currently rapi is the only daemon which accepts a port option, rather
than querying its own port from services, and failing back to the
default if not found. Changing this to conform to what other daemons do.

Also update the ganeti-rapi(8) manpage

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

GetNodeDaemonPort is used to lookup the node daemon port in the services
file, and if not found to return the default one. We make it a generic
function, which accepts the daemon name in input, so that it can be used
by confd as well, to lookup its own udp port.

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

Various modules set it to True when called in debugging mode, but the
utils module supports no such global.

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

substitute exit(1) with exit(constants.EXIT_FAILURE).
Also fix a wrongly indented line.

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>