This uses the new LUMoveInstance. It supports only single-instance moves.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

This patch adds querying of ctime/mtime for the cluster/nodes/instances.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

This can be used for a 'plain' type instance when the underlying storage
went away, to recreate the storage (and reinstall) instead of removing
the instance and readding it.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Currently ‘gnt-backup export’ always returns exit code zero, even in the
face of complete failure during backup (only failure to stop/start the
instance will cause job failure and thus non-zero exit code). This is
bad, since one cannot script the backup.

This patch adds some simple results from the LU so that the command line
script can return good exit code. It will:
  - return zero for full success (snapshot removal errors are ignored
    though)
  - return one for full failure (finalize export failure or all disks
    failure)
  - return two for partial failure (some disks backed up, some not)

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

This patch adds a new opcode and lu for checking disk sizes. Currently
it does only top-level disk verification, and also doesn't check
primary/secondary node size mismatches (these two are added as TODOs in
the Exec() function of the LU).

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

This patch modified OpActivateDisks, LUActivateDisks and gnt-instance
activate-disks to support and pass this option to
_AssembleInstanceDisks.

The patch is quite trivial I think; there should be no issues from it
except if used when not needed.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

This way the user can also show storage types other than lvm-pv.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

This command can be used to list all physical volumes on nodes.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

This command can be used to follow the output of a job. It's useful
together with the --submit parameter for other commands.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

When the parameter is set to True and start_daemons is also True,
ganeti-masterd will be started with the new --no-voting --yes-do-it
options.

This new option is set to True only on masterfailover, when no_voting is
used. This changed the behavior from 2.0, where we didn't start the
master daemon at all, when this option was used.

The manpage is also updated to remove the 2.0 only change.

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Currently rapi is the only daemon which accepts a port option, rather
than querying its own port from services, and failing back to the
default if not found. Changing this to conform to what other daemons do.

Also update the ganeti-rapi(8) manpage

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

This patch converts ‘gnt-instance reinstall’ from single-instance to
multi-instance model; since this is dangerours, it's required to pass
“--force --force-multiple” to skip the confirmation.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>
(cherry picked from commit 55efe6da)

[iustin@google.com: slightly reworded the explanation for offline and
changed the commit message]
Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Currently we have both a default_hypervisor and an enabled_hypervisors
list. The former is only settable at cluster init time, while the latter
can be changed with cluster modify.

This becomes cumbersome in a few ways: at cluster init time for example
if we pass in a list of enabled hypervisors which doesn't include the
"default" xen-pvm one, we're also forced to pass a default hypervisor,
or an error will be reported. It is also currently possible to disable
the default hypervisor in cluster-modify (with unknown results).

In order to avoid this we get rid of this field altogether, and define
the "first" enabled hypervisor as the default one. This allows ease of
changing which one is the default, and at the same time maintains
coherency.

At configuration upgrade we make sure that the old default is first in
the list, so that 2.0 cluster defaults are preserved.

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

When the parameter is set to True and start_daemons is also True,
ganeti-masterd will be started with the new --no-voting --yes-do-it
options.

This new option is set to True only on masterfailover, when no_voting is
used. This changed the behavior from 2.0, where we didn't start the
master daemon at all, when this option was used.

The manpage is also updated to remove the 2.0 only change.

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

This allows failing over in certain corner cases, such as a 2 node
cluster with one node down. The man page is also updated to document
this dangerous option and how to recover from this situation.

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

This patch adds a ‘role’ node list field, which shows a one-character
node status. This is a simpler way to see the node status than selecting
all the flags individually.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

Document the new nics list, as an alternative to the one nick which you
can create with the old mac, ip, mode, link/bridge keys.

Also specify that 'bridge' is still accepted as well.

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

It was mistakenly called --backend

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Fix a typo in the man pages that used the wrong option name.

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Reported in issue 59.

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

This (somewhat big) patch adds support for remotely rebooting the nodes
via whatever support the hypervisor has for such a concept.

For KVM/fake (and containers in the future) this just uses sysrq plus a
‘reboot’ call if the sysrq method failed. For Xen, it first tries the
above, and then Xen-hypervisor reboot (we first try sysrq since that
just requires opening a file handle, whereas xen reboot means launching
an external utility).

The user interface is:

    # gnt-node powercycle node5
    Are you sure you want to hard powercycle node node5?
    y/[n]/?: y
    Reboot scheduled in 5 seconds

The node reboots hopefully after sending the reply. In case the clock is
broken, “time.sleep(5)” might take ages (but then I suspect SSL
negotiation wouldn't work).

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

This patch converts ‘gnt-instance reinstall’ from single-instance to
multi-instance model; since this is dangerours, it's required to pass
“--force --force-multiple” to skip the confirmation.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

This patch modifies the start instance script, opcode and logical unit
to support temporary startup parameters.

Different from 1.2, where only the kernel arguments were supporting
changes (and thus xen-pvm specific), this version supports changing all
hypervisor and backend parameters (with appropriate checks).

This is much more flexible, and allows for example:
  - start with different, temporary kernel
  - start with different memory size

Note: in later versions, this should be extended to cover disk
parameters as well (e.g. start with drbd without flushes, start with
drbd in async mode, etc.).

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

In Ganeti 1.2, “none” was used to signify no initrd. In 2.0 we have
changed to “no_” as a prefix (i.e. “-H no_initrd_path”) and thus we
document in the manpage this.

The QA suite is changed accordingly.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

Sometimes reinstalls are slightly different than new installs. For
example certain partitions may need to be preserved accross reinstalls.
In order to do that on a per-os basis we pass in the INSTANCE_REINSTALL
variable to inform the create script about when a reinstall is
happening.

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Currently “gnt-debug submit-job” takes a single argument and has
non-trivial startup-costs; in order to exercise the job system, it is
better to be able to submit multiple jobs with a single invocation of
the script.

This patch extends it to take multiple argument, de-serialize the
opcodes and then submit all of them as fast as possible, in order to
increase pressure on the master daemon.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Alexander Schreiber <als@google.com>

Add the --all argument, and reword a bit the basic information.

Reviewed-by: iustinp

This patch adds a couple of both externally and internally reported
issues:
  - missing SGML tags (Issue 54), report and patch by superdupont
  - wrong variable used in the init.d script, report and patch by
    Karsten Keil <karsten-keil@t-online.de>
  - man page for gnt-instance reinstall needs clarification (Issue 56)
  - gnt-instance man page missing --disks documentation for
    replace-disks
  - gnt-node modify help output is unclear about the -C/-D/-O input
    format, and the man page doesn't document this command at all
  - “gnt-node modify -C yes” for offline or drained nodes had wrong
    error message
  - “gnt-instance reinstall --select-os” has wrong prompt, we only
    accept a number for the OS and not the template name

Reviewed-by: ultrotter

Now it displays:

--hypervisor-parameters hypervisor:hv-param=value [ ,hv-param=value ... ]
--backend-parameters be-param=value [ ,be-param=value ... ]

Sorry for the super-long lines :( Is there a better way to insert spaces
without pushing them to the resulting man page?

Reviewed-by: iustinp

This adds a small paragraph about the “master” role of a node, and fixes
a wrong indentation in the bash completion file.

Reviewed-by: imsnah

This patch removes the extra_args parameter and instead switches the
instance to the HV_KERNEL_ARGS hypervisor option.

This is a big change, but it's a needed cleanup, this extra parameter on
all RPC calls is not generic and we also need to have a persistent value
here.

Reviewed-by: imsnah

This patch fixes many small issues related to write functions:
  - update documentations w.r.t. how to add users
  - update the instance add function for latest API
  - add instance delete
  - fix addition of tags
  - update some error messages

Reviewed-by: imsnah

This patch adds back to the instance creation command (gnt-instace add,
gnt-backup import) the ‘-s’ short form option for specifying a
single-disk instance.

Also a small bug in gnt-backup import is fixed.

Reviewed-by: ultrotter

This patch updates the gnt-* scripts to show the new 2.0 syntax. It's
not guaranteed to be 80% complete.

Reviewed-by: ultrotter