This patch adds a new opcode and lu for checking disk sizes. Currently
it does only top-level disk verification, and also doesn't check
primary/secondary node size mismatches (these two are added as TODOs in
the Exec() function of the LU).

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

Note that this exports the disk size as bdev returns it, in bytes. The
value will be converted to MiB in cmdlib.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

This patch adds a GetActualSize for block devices that returns the
actual disk size. It is done using blockdev (and stat for file storage).

While this could be done via reading /sys/block/N/size, that is not as
simple as running blockdev, as the correspondence between an LV and its
sys entry is not straightforward.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

This patch modified OpActivateDisks, LUActivateDisks and gnt-instance
activate-disks to support and pass this option to
_AssembleInstanceDisks.

The patch is quite trivial I think; there should be no issues from it
except if used when not needed.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

This patch adds an optional parameter to _AssembleInstanceDisks that
allows ignoring of size information by making a copy of the disk
structure and setting the size to zero.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

This method recursively resets the size of the disk and its children to
zero.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

This patch changes the DRBD8 class (the only one to use the size in
Assemble) to ignore the size in Assemble when a zero size is passed.
This will allow activation of disks even when the size recorded in the
configuration is wrong.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

This is identical to dc30b0e4 but applied to gnt-backup. Thanks to user
ocaner for catching it.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

Instead of multiple uploads to each node, this script copies everything
as needed to the temporary directory, exactly as to be installed in the
destination machine, then runs only one rsync per host.

This is more dangerous (we can break /etc now), but for development
machines is fine.

The patch then also uploads the bash completions and the current name
for the cron job (I think that ganeti-master-cron is a deprecated name,
not that someone actually intends to upload a file named like that). A
flag --no-cron is added to skip uploading the cron file if desired.

The patch also changes rsync to propagate the file permissions.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

This small patch adds a simple Copy method that is can be used for
'throw-away' copies of objects.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

When the parameter is set to True and start_daemons is also True,
ganeti-masterd will be started with the new --no-voting --yes-do-it
options.

This new option is set to True only on masterfailover, when no_voting is
used. This changed the behavior from 2.0, where we didn't start the
master daemon at all, when this option was used.

The manpage is also updated to remove the 2.0 only change.

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

[iustin@google.com: slightly reworded the explanation for offline and
changed the commit message]
Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

In order not to change the default during a stable series, we modify
configure.ac to default to one stripe, in effect keeping the status quo
(well, minus the LVM Attach() changes).

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

LVM has issues when growing stripped volumes, so it's best to specify
the growth in exact multiples of the full stripe size (as precise as
possible). For this we need to do a couple of changes:
  - in LVM Attach(), we query additionally the VG extent size and the LV
    stripe count; since this makes lvs return a (possibly) multi-line
    output, we now split it into lines and only take the last one
  - in LVM Grow(), we round up the increase in multiples of the full
    stripe size

The patch also sets the correct target size in DRBD growth.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Olivier Tharan <olive@google.com>

This patch adds instance reinstall to RAPI, with two optional parameters:
  - ‘os', in order to change the OS on reinstall
  - ‘nostartup’, in order to leave the instance down after reinstall

The call will first shutdown the instance, the reinstall it, and unless
‘nostartup’ has been passed and is equal to 1, it will be started
automatically.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

This allows failing over in certain corner cases, such as a 2 node
cluster with one node down. The man page is also updated to document
this dangerous option and how to recover from this situation.

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

This will be used by ganeti-noded to start ganeti-masterd in a
--no-voting masterfailover.

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

With the change to stripped LVs, the actual size of a meta device (which
is small) can be more than we expected (for non-stripped LVs). This
patch increases from 160MB to 1GB the accepted size, and updates the
comment with the rationale behind this change.

Note that we do want even meta devices stripped, since it can increase
metadata update.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Olivier Tharan <olive@google.com>

Currently, when draining nodes we reset their master candidate flag, but
we don't instruct them to demote themselves. This leads to “ERROR: file
'/var/lib/ganeti/config.data' should not exist on non master candidates
(and the file is outdated)”.

This patch simply adds a call to node_demote_from_mc in this case.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

This patch fixes a few node readd issues.

Currently, the node readd consists of two opcodes:
  - OpSetNodeParms, which resets the offline/drained flags
  - OpAddNode (with readd=True), which reconfigures the node

The problem is that between these two, the configuration is inconsistent
for certain cluster configurations. Thus, this patch removes the first
opcode and modified the LUAddNode to deal with this case too.

The patch also modifies the computation of the intended master_candidate
status, and actually sets the readded node to master candidate if
needed. Previously, we didn't modify the existing node at all.

Finally, the patch modifies the bottom of the Exec() function for this
LU to:
  - trigger a node update, which in turn redistributes the ssconf files
    to all nodes (and thus the new node too)
  - if the new node is not a master candidate, then call the
    node_demote_from_mc RPC so that old master files are cleared

My testing shows this behaves correctly for various cases.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

If the config file is missing when the DemoteFromMC() function is
called, it will raise a ProgrammerError. Instead of changing the
utils.CreateBackup() file which is called from multiple places, for now
we only change the DemoteFromMC() function to not call it if the file is
not existing (we rely on the master to prevent race conditions here).

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Olivier Tharan <olive@google.com>

This patch modifies ConfigWriter.GetMasterCandidateStats to allow it to
ignore some nodes in the calculation, so that we can use it to predict
cluster state without some nodes (which we know we will modify, and thus
we should not rely on their state).

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Olivier Tharan <olive@google.com>

Currently the message for extraneous files on non master candidates is
confusing, to say the least. This makes it hopefully more clear.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Olivier Tharan <olive@google.com>

The code for adjusting the candidate pool size was done after the config
update, and this means we triggered the save of the config file without
fixing the candidate pool, which aborts with an error.

The patch just moves it above. The old comment was valid, but we anyway
save the config file in MaintainCandidatePool, so this should be safe.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

This patch adds a ‘role’ node list field, which shows a one-character
node status. This is a simpler way to see the node status than selecting
all the flags individually.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

Currently the http library only checks credentials when authentication
is required. This means that any credentials are accepted on the root
resource, for example, which makes problems hard to diagnose - the
user/pw works for all queries, until one tries to do a modification at
which point fails.

This patch changes the PreHandleRequest() function to not ignore
credentials when passed, even if we don't require authentication. This
makes the behavior of RAPI more predictable.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

The documentation for the reboot was wrong. This patch fixes it and
updates the docstring with more details.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

Currently running “gnt-instance list -o+vcpus” fails with a cryptic message:
  Unhandled Ganeti error: vcpus

This is due to multiple issues:
  - in some corner cases cmdlib.py raises an errors.ParameterError but
    this is not handled by cli.py
  - LUQueryInstances declares ‘vcpu’ as a supported field, but doesn't handle
    it, so instead of failing with unknown parameter, e.g.:
      Failure: prerequisites not met for this operation:
      Unknown output fields selected: vcpuscd
    it raises the ParameteError message

This patch:
  - adds handling of 'vcpus' to LUQueryInstances
  - adds handling of the ParameterError exception to cli.py
  - changes the 'else: raise errors.ParameterError' in the field handling of
    LUQueryInstance to an assert, since it's a programmer error if we reached
    this step

With this, a future unhandled parameter will show:
  gnt-instance list -o+vcpus
  Unhandled protocol error while talking to the master daemon:
  Caught exception: Declared but unhandled parameter 'vcpus'

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

The current check in LUCreateInstance.CheckPrereq() is wrong - it only checks
if we got an OS, but not if we got a valid OS. This patch fixes it.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

The size of the instance's disk was not shown in “gnt-instance info”.
This patch adds it and formats it nicely if possible.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

It was mistakenly called --backend

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Currently we support querying for "mac" "ip" or "bridge", meaning "the
one of the first nic. We are not checking that there is a first nic,
though, and thus could incur in errors. This patch fixes it by returning
"None" should there be no such nic, as it's done when explicitely asking
for a nic via nic.<field>/<N>

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

* master:
  Update NEWS and version for 2.0.1 release
  gnt-{instance,backup}(8) --nic is actually --net
  Fix a wrong function name in backend.DrbdAttachNet
  GNT-CLUSTER(8) fix search-tags example

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

Fix a typo in the man pages that used the wrong option name.

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Commit cf8df3f3 "bdev: forward-port
ReAttachNet/DisconnectNet" forward-ported 1.2's bdev.DRBD8.ReAttachNet()
to 2.0 while renaming it to AttachNet(), but commit
6b93ec9d "Forward-port DrbdNetReconfig"
didn't rename all the calls to it and left one ReAttachNet call in
backend.py.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

Reported in issue 59.

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

This patch enables stripped LVs, falling back to non-stripped if the
stripped creation fails. If the configure-time lvm-stripecount is 1,
this patch becomes a noop (with an insignificant python-level overhead,
but no extra lvm calls).

The effect of this patch is that new instances will get stripped LVs
from the start, whereas old instances will have their LVs stripped as
soon as replace-disks is run for them.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>