Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

This way it can be used by the client as well

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

Make sure that if we try to send packages which are too big (which
shouldn't happen) this gets properly logged in the config file.

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Luca Bigliardi <shammash@google.com>

This will make it easier to change the protocol later on

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

It refers to an older input variable

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

This allows this extended asyncore+udp module to be used also in other
daemons, and in the confd client library

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

Currently if we fail writing to the socket (perhaps because a signal was
delivered) we lose the data we were sending. Although this is not too
bad (it's udp, and data may get lost anyway) we try to avoid this by
just putting the packets to write in a queue and handling that through
the normal asyncore methods.

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

Currently if a signal is delivered during an attempted read, an
exception is logged in the logfile. There is no need for this, so we
handle this case explicitely.

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

This can be useful for debugging locking problems.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

There are two major arguments for this:
- There will be more callbacks (e.g. for lock debugging) and extending the
  parameter list is a lot of work.
- In the jqueue module this allows us to keep per-job or per-opcode variables in
  a separate class. Instead of having to clean up the worker class after
  processing one job, these references will automatically go out of scope.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Luca Bigliardi <shammash@google.com>

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

When confd is disabled we don't want to be noticed every timer interval.

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

Rather than quitting we'll just continue to poll the config at a slow
rate, hoping that sooner or later we'll get it back. This allows also
working on non-MC nodes, and smoothly transitioning from MC to non-MC,
other than dealing with a few temporary breakages.

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

This allows us not to enable the inotify handler immediately, and thus
to make it easier for us should the config file not exist at all.

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

This is a state the processor will get in, if it fails to load the
config.

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

This will be useful to make ConfdProcessor aware of a config failure,
without quitting confd.

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

In a case we don't encounter frequently (file modified but not
overwritten) the notify handler we use is called with a wrong name.

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Timers are used both for checking for inotify failures, and for polling,
should inotify notices become too frequent.

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

Rather than raising ConfdFatalError directly
ConfdInotifyEventHandler.enable raises InotifyError should it not be
able to configure inotify, allowing the caller to decide what to do.

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

ConfdInotifyEventHandler used to reload the config whenever a
notification arrived. Moving to a callback system, so that
ConfdConfigurationReloader can be responsible for that functionality.

Additionally the inotify class no longer reenables itself automatically,
but just notifies the callback if it's been disabled, and waits for its
call to enable(). This allows, should ConfdConfigurationReloader decide
it wants to move to polling, to avoid having a double enable()/disable()
call.

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

This class will be responsible for managing inotify notifications,
timers, and rate-limiting reloads. For now none of these features is
implemented. :)

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

Make possible to enable and disable the inotify event handler.  The
inotify handler will remain enabled, unless explicitely told to disable
itself.

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

Currently the luxi error handling is hardcoded as special encoding on
the masterd-side and special decoding on the client side. This patch
moves it to errors.py such that other parts of the code can reuse the
same encoding.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

This can be used during maintenance work.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

One shouldn't fork a Python process after using threads. Master
voting is done before forking (utils.Daemonize), but it also uses
threads. Hence it's now called from a separate process.

This patch also fixes the check function to actually exit if
the current machine is not the master (introduced in 04ccf5e9).

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

This will be used to do the master voting.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

This uses a simple 'dd if=… | ssh $target dd of=…' method, like the
ExportSnapshot (which uses the OS export; here we want full disk-level
copy and not any FS-level changes).

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

Now that mainloop is asyncore-enabled we can easily do that.

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

confd.server and daemons/ganeti-confd import a few modules they don't
actually use. Clean them up.

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Signed-off-by: Guido Trotter <ultrotter@google.com>

ganeti-confd is a simple asynchronous daemon, which listens on a UDP
port, passes each packet to a processor, and sends back to the client
the result.

It also listens on an inotify socket, in order to reload its
configuration when the ganeti config file changes.

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>