Clarify the fact that temporary HV/BE params in instance start override
and do not extend the configured parameters; and change the instance
list headers from HVM_* to * since many of the parameters apply to KVM
too. Also fix a typo in the rapi documention for '/2/nodes'.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

This includes a few paragraphs about daemon-util.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

This is in preparation to including it into the large
documentation.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

This documents the new error classifier added for OpPrereqError.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

This patch does multiple documentation updates for the new framework,
all pretty straightforward.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

The rewrite after the introduction of the daemon-util script has a
copy-paste error.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

Until now, Ganeti started and stopped its own daemons using custom functions.
To start, the daemon was just executed and then sent the appropriate signals to
stop it again. Init scripts would have to pay attention to the PID file and
other things.

With this patch, a new script is added (“daemon-util”, installed in
$prefix/lib/ganeti/), centralizing the starting and stopping of daemons. The
provided example init script is adjusted to use this new script. Ganeti's code
no longer calls its own init script.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

This requires git and lockfile-progs, and only backs up config.data (see
the comments why).

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Our admin guide was very very trivial. This patch updates it to contain
advice on when to use which commands, removes the instance
administration part from the installation guide (moved to the admin
guide), and adds a walkthrough document that should be useable as a
starting point for new admins.

The patch also adds emacs variables to the documents, and rewraps some
which were not already at 72 chars.

The doc updates also show backwards-compatible commands for Ganeti 2.0,
as we don't have a good up-to-date 2.0 document and people might refer
to this set of documentation even when running that.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

This was implemented in 350ecfec and reverted in 700bb843
after it broke “make distcheck”. With other changes in this
patch series this will work now.

Contributing to the original problem was that the news.rst file
was not distributed. When we distribute the build documentation,
the source must also be included (see Automake manual).

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

Currently we can start/stop the various subdaemons, but not confd.

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Olivier Tharan <olive@google.com>

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Olivier Tharan <olive@google.com>

This addresses issue 75.

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

Signed-off-by: Luca Bigliardi <shammash@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

Remove variables which are listed at the beginning of the section and variables
which are not declared when building hooks env.

Signed-off-by: Luca Bigliardi <shammash@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

The networking section is updated to talk about both routing and
bridging.

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Currently the section is called "Installing Xen" and also mentions KVM.
Updating the title and also make it slightly less xen-centric.

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

This reverts commit 350ecfec. It broke
distcheck.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

The install guide asks the user to use the fqdn in the hostname, but
doesn't explain why. This has been asked multiple times, so adding an
explanation there.

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>
Reviewed-by: Olivier Tharan <olive@google.com>

Also increase the table of contents' depth to 4.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Luca Bigliardi <shammash@google.com>

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Luca Bigliardi <shammash@google.com>

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Luca Bigliardi <shammash@google.com>

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Luca Bigliardi <shammash@google.com>

This hook is a simple example which automatically configures a basic IPsec link
among all the nodes of a cluster.

Signed-off-by: Luca Bigliardi <shammash@google.com>

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Add documentation about new cluster-destroy-post hook.

Signed-off-by: Luca Bigliardi <shammash@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Update hooks documentation with the new opcode (not deleting OP_INIT_CLUSTER
from obsolete operations because the name is different).

Signed-off-by: Luca Bigliardi <shammash@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Run post phase of node-remove on the removed node as well.

Signed-off-by: Luca Bigliardi <shammash@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>