According to doc/design-network.rst, there is a new NIC
parameter 'network', which can be used to link an instance
to a network. This was so far undocumented in the man
page of 'gnt-instance'.

Signed-off-by: Helga Velroyen <helgav@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

'explicitly' was spelled the wrong way

Signed-off-by: Benjamin Kerensa <bkerensa@ubuntu.com>
Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

_GetKVMOutput expects the command to succeed, but unfortunately on some
versions of kvm "-device ?" will output a correct list of devices, while
exiting with an error code.

To fix this we accept failure in that case (note that this doesn't
change the situation when this command is not supported, as in that case
the output will still not contain the correct string).

This patch also updates the docstring, adding the parameter types and
description.

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

If stopping an instance failed, the configuration would already be gone
and other operations depending on it (e.g. migration) would no longer
work. With this patch the configuration file is only removed once the
instance was succesfully stopped or destroyed.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Michele Tartara <mtartara@google.com>

Change all “Verify” methods in hypervisor abstractions to explicitely
return None if no problem was detected. Remove punctuation from error
messages. Update docstrings with “@return” and some small mistakes.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

_Error() didn't contain the logic for demoting errors to warnings and for
marking an operation as failed. Now _ErrorIf() is just a minimal wrapper
for _Error().

Unit tests included.

Signed-off-by: Bernardo Dal Seno <bdalseno@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

* master:
  Handle the result of QueryGroups() correctly

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

If no group is given for the “gnt-network connect“/“… disconnect”
commands, the client uses the result of “QueryGroups()” which is a list
of lists. Use “itertools.chain()” to handle the return value correctly.

Signed-off-by: Dimitris Aragiorgis <dimara@grnet.gr>
Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Dimitris Aragiorgis <dimara@grnet.gr>
Reviewed-by: Michael Hanselmann <hansmi@google.com>
(cherry picked from commit af3aea48)

If no group is given for the “gnt-network connect“/“… disconnect”
commands, the client uses the result of “QueryGroups()” which is a list
of lists. Use “itertools.chain()” to handle the return value correctly.

Signed-off-by: Dimitris Aragiorgis <dimara@grnet.gr>
Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Dimitris Aragiorgis <dimara@grnet.gr>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

In _ReadConfigFile, the filename should be prepared outside the
try/except block. Fixes bad code formatting, too.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Helga Velroyen <helgav@google.com>

This patch moves the functions “_ReadTestData” and “_TestDataFilename”
to module level. They do not depend on a class instance at all.

Some cases of “utils.ReadFile(self._TestDataFilename(…))” are also
corrected.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Bernardo Dal Seno <bdalseno@google.com>

Add a unit test for the trivial “_GetBlockDevSymlinkPath” function in
backend (small changes in the function were required).

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Bernardo Dal Seno <bdalseno@google.com>

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Bernardo Dal Seno <bdalseno@google.com>

This fixes a missing 's' in the format string and
the wrong quotes. Those bugs were introduced in
commit 6e043e60.

Signed-off-by: Helga Velroyen <helgav@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

The current names are quite confusing; this patch cleans up the
confusion by making sure we use different terms for the two threads,
etc.

No actual code changes besides the renames.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

Currently, the polling thread sleeps at the end of its body; the
original reason was that when the thread initially starts, we want to
load the config immediately (in the old-style config load model).

However, now we explicitly load the config, so we can make this thread
behave like the watcher thread: sleep first, then do the work. This
model improves for example the startup of the thread, by not redoing a
config check immediately after switching to polling mode.

We also increase the max idle poll rounds interval from 2 to 3; the
new behaviour means that we revert from polling to inotify after
around one second of no changes.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

This patch changes the resolution of the timers: the watcher timer
goes from 60s to 17s, and the polling-mode timer goes from 2 seconds
to 250ms. The code changes a bit more due to the changes in the units
of the various constants.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

Currently the Haskell logging goes with the default time formatting,
which lacks sub-second resolution. This is not good, as it's too
coarse.

The patch adds picoseconds to the log; they will contain usually too
many zeroes, but the other option is to use a log format that (for
precisely zero fractional part) omits the separator, so it's not
consistent from line to line, and which also uses a dot as a
separator, different from the Python code.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

In some cases we need higher resolution that seconds; I've settled on
microseconds as that is what 'threadDelay' wants, for exactly, so it's
easier if we keep the same units.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michele Tartara <mtartara@google.com>

This patch changes the default model—where confd is always started in
polling mode—to a model where if possible we enable inotify mode
before starting any of the background threads.

There are some tricky details here: if we enable inotify, we should
not modify the server state after wards, as inotify events could have
already fired and took ownership; therefore we presume that inotify
will work and set reloadModel=ReloadNotify, and only if we fail to
enable it we change it back to polling mode.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

Currently, confd main function doesn't load the config, but simply
forks the individual timer threads, which will—as a side effect-also
load the configuration as soon as they start.

However, this makes codes to the startup more complex, so let's
explicitly (try to) load the configuration as first thing.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

If opportunistic_locking is used, then 'node_whitelist' parameter passed
to the allocator is set to the LU's owned node locks. However, LU owned_locks
has type of 'set' while IReqInstanceAlloc expects type of
'ht.TMaybeListOf(ht.TNonEmptyString)'.

Signed-off-by: Christos Stavrakakis <cstavr@grnet.gr>
Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

Add a unittest for a function formatting CPU pinning information for
Xen's configuration.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

This was left behind because it required a different kvm invocation.
Now that we can add new ones cheaply (two constants) it's easy to get
rid of it. Differently than in other cases we support old version which
don't have the actual option, and error out when it's invoked.

This also removes two hardcoded strings, and brings them at constant
level. A lot more are present, but two is megl che one (cit).

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

We had the same code twice, and were about to add a third time. Better
to collapse it into just one function.

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

Stop hardcoding the path in “hv_xen.py”.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

If the placeholder has exactly the same name as the variable used in
autoconf it would be replaced as well. In the case of
“@ENABLE_SPLIT_QUERY@” this led to the sed command “s#False#False#g”.
Inserting additional quotes after the first @ sign prevents this.

Since ENABLE_SPLIT_QUERY was not actually used it is removed.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Michele Tartara <mtartara@google.com>

Just determine whether it can migrate and keep that value instead of the
full hypervisor class.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

This adds two functions in Utils.hs: 'wrap' and 'trim' along with some
simple tests. 'wrap' is used in Common.hs for wrapping command
descriptions to a fixed line length, e.g. useful for the "--help"
option.

Signed-off-by: Yiannis Tsiouris <gtsiour@softlab.ntua.gr>
Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Signed-off-by: Constantinos Venetsanopoulos <cven@grnet.gr>
Reviewed-by: Guido Trotter <ultrotter@google.com>

Documentation with included man pages should not be distributed as it
contains fixed paths. Since the documentation with man pages is actually
written to a separate directory, tarball creation is still possible.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

If machine version is passed as an hv param, a check is made
in target node whether this version is included in the supported
ones derived from kvm -M ? command.

Signed-off-by: Dimitris Aragiorgis <dimara@grnet.gr>
Reviewed-by: Guido Trotter <ultrotter@google.com>

This reverts commit dd60179d as it broke coverage for Python.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

cluster-verify reports instances with disk templates not compatible with
exclusive storage but that are running on nodes with the exclusive storage
flag set.

Signed-off-by: Bernardo Dal Seno <bdalseno@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

When exclusive_storage is set, cluster-verify complains if PVs are shared
among unrelated LVs.

Signed-off-by: Bernardo Dal Seno <bdalseno@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

This will be used for checks related to exclusive storage.

Signed-off-by: Bernardo Dal Seno <bdalseno@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

Almost all instance-specific checks have been moved from the Exec method to
the _VerifyInstance method. This cleans up Exec, which was becoming too big
even for pylint…

Signed-off-by: Bernardo Dal Seno <bdalseno@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

add-node now performs a few checks on LVM before adding a node to the
cluster.

Signed-off-by: Bernardo Dal Seno <bdalseno@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

This will be used in node-add.

Signed-off-by: Bernardo Dal Seno <bdalseno@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>