Many of our functions have to follow a given API, and thus we have to
keep a given signature, but pylint doesn't understand this. Therefore,
we silence this warning.

The patch does a few other cleanups.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Olivier Tharan <olive@google.com>

This removes unused variables in the rest of the code (outside lib/).

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Olivier Tharan <olive@google.com>

This patch should have only:

- pylint disables
- docstring changes
- whitespace changes

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Olivier Tharan <olive@google.com>

This patch removes the quotes from CommaJoin and converts most of the
callers (that I could find) to it. Since CommaJoin does str(i) for i in
param, we can remove these, thus simplifying slightly a few calls.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

This reverts commit 6915bc28 based on thread on
ganeti-devel.

Conflicts:

	lib/cmdlib.py (due to the error code classification, trivial)

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

Currently a few of the LU's CheckPrereq use utils.HostInfo which raises
a resolver error in case of failure. This is an exception from the
standard that CheckPrereq should raise an OpPrereqError if the error is
in the 'pre' phase (so that it can be retried).

This patch adds a new error code (resolver_error) and a wrapper over
utils.HostInfo that just converts the ResolverError into
OpPrereqError(…, errors.ECODE_RESOLVER). It then uses this wrapper in
cmdlib, bootstrap and some scripts.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

Currently the repair storage has two issues:

- down instances are aborting the operation, even though they should be
  ignored (it's not technically possible to know their disk status
  unless we would activate their disks)
- if the VG is so broken that disks cannot be activated via gnt-instance
  activate-disks or gnt-instance startup, it's not possible to repair
  the VG at all

The patch makes the opcode skip down instances and also introduces an
``--ignore-consistency`` flag for forcing the execution of the LU.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

This finishes the conversion of OpPrereqError creation to two-argument
style. Any leftovers as one-argument are not breaking anything, just
losing information about the errors.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

This patch unifies the query fields in the storage framework for all
types. Note that the information is still computed on-demand, so if e.g.
the used disk space is not requested for the ‘file’ type, it won't be
computed on nodes.

Summary of changes:
- improve the LVM storage type to support multiple lvm fields in the
  LIST_FIELDS declaration and constant (not-computed via lvm commands)
  fields
- rename utils.GetFilesystemFreeSpace to utils.GetFilesystemStats
  returning tuple of (total, free)
- add used and free as valid fields for lvm-vg (use being computed as
  vg_size-vg_free)
- make allocatable accepted for all types (ones which are always
  allocatable always return True)
- add a new list field ‘type’ that gives the current selected type; not
  much useful today (except for understanding what the default output
  is) but in the future might help if we want to list multiple types
- add type, size and allocatable to the default output field list
- update the man page with details on how, for file storage, size ≠ used
  + free for non-mountpoint cases

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

This patch adds support for the -o+field,… format that the other list
commands accept and changes the format of the allocatable field from
simply str(bool) to Y/N.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

To reduce confusion, the following gnt-node commands are renamed:

- physical-volumes → list-storage
- modify-volume → modify-storage
- repair-volume → repair-storage

The NEWS file is update accordingly and it also gets emacs local
variables.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

This was broken by me in 064c21f8, sorry!

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

- We never remember to use it (5 uses vs 21 " ,".join())
- It's longer to write than " ,".join()
- The added value of the apostrophe in the string is not very much

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

The patch modifies LUQueryInstanceData to return the uuid too and also
adds support for it in the gnt-* scripts.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

Since >90% of the commands take the “--debug” option, and all should
actually take it (the gnt-job command is currently missing it), it makes
sense to simply remove this and add it by default in cli.py.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

Currently, the indentation level for a command's definition depends on
the command name length, and this makes the commands dict unpleasant to
the eye. This patch changes it so that a new line begins right after the
left parenthesis starting the command tuple.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

This also unifies a little the parameters to the respective options.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

This patch also changes the gnt-debug's “--algorithm” into
IALLOCATOR_OPT, since it was the only non-standard use of this (due to
historical reasons). Since it's just a debug option,
backwards-compatibility is not critical here.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

This completes what was began in commit
862b1b2b

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

gnt-node modify says it wants an "<instance>". Changing it to
"<node_name>" as for the other commands.

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Olivier Tharan <olive@google.com>

It expands to the hostnames known by bash.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

This can be used to generate the bash completion script automatically.
In the future it may allow for better command line validation as well.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

This patch adds querying of ctime/mtime for the cluster/nodes/instances.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

The iallocator option is '-I' not '-i'.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

This way the user can also show storage types other than lvm-pv.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

This command can be used to list all physical volumes on nodes.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>