KVM >= 1.0 is needed.

Introduce new methods: HotAddNic/HotDelNic

Both qemu monitor interface for hotplugging. If a device has
hotplug info (idx, pci) then:
 - it gets named after it (e.g. virtio-net-pci.%d % idx ).
 - it gets placed to the pci slot (hex(pci)) of bus 0.
If no hotplug info exist or kvm version is old then no hotplug takes
place and modifications will take place after reboot:
 - devices will get traditionaly named
 - and placed automaticaly in empty pci slots

NIC hotplug:
 - open a tap and get its file descriptor.
 - pass fd with SCM rights (using python-fdsend) via monitor socket
 - create netdev and device with proper qemu interface

Disk hotplug:
 - create drive with drive%d % idx name
 - create device virtio-blk-pci.%d % idx

In order to migrate a VM that has devices hotplugged, an identical
VM should be booted with -incoming. To this end every time a hotplug
takes place runtime file must be updated.

For disk hotplug support we removeds disk from kvm_cmd in
runtime file add added them separately just like nics. So code building
disk related options has been moved out from _GenerateKVMRuntime()
and added to _ExecuteKVMRuntime().

Signed-off-by: Dimitris Aragiorgis <dimara@grnet.gr>

Introduce new HotplugInfo object as part of Instance object.

hotplug_info { 'nics': 0, 'disks': 0, 'pci_pool': [16, 17, 18] }

nics/disks is an index used for device identification and naming.
Everytime a new device (disk/nic) is hotadded these values get incremented.

pci_pool is a list of pci slots where a device can be placed. Every
time a device gets hot-plugged/unplugged a pci slot gets popped/appended.

Signed-off-by: Dimitris Aragiorgis <dimara@grnet.gr>

Currently, hail fails with FailDisk when trying to add an instance
of type: 'file', 'sharedfile' and 'rbd'.

This is due to a "0" or None value in the corresponding dict inside
_ComputeDiskSize, which results in a "O" or non Int value of the
exported 'disk_space_total' parameter. This in turn makes hail fail,
when trying to process the value:

 - with "Unable to read Int" if value is None (file)
 - with FailDisk if value is 0 (sharedfile, rbd)

The latter happens because the 0 value doesn't match the instance's
IPolicy, since it is lower than the minimum disk size.

The second problem still exists when using adoption with 'plain'
and 'blockdev' template and will be addressed in another commit.

Signed-off-by: Constantinos Venetsanopoulos <cven@grnet.gr>
Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Due to an oversight, the pause/resume sync RPC calls in _WipeDisks
lack the verification of the overall RPC status, and directly iterate
over the payload. The code actually doing the wipe does verify
correctly the results. This can result in jobs failing with a hard to
diagnose:

OpExecError ['NoneType' object is not iterable]

instead of proper "RPC failed" message.

This patch adds a hard check on the pause call, but for the resume
call it just logs a warning if the RPC failed; the rationale being
that if we can't contact the node for pausing the sync, it's likely
wiping will fail too, but after the wipe has been done, we can
continue.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: René Nussbaumer <rn@google.com>

This is a bit of a shell munging trickery, but works for now. Making
it more generic can be done later.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: René Nussbaumer <rn@google.com>

This breaks the command, as optparse considers that an error.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: René Nussbaumer <rn@google.com>

Due to the fact how the automake system works it doesn't rebuild already
prebuild files in distcheck. This lead to a bug, where a rebuild of the
documentation was failing because we missed the fact that the files were
missing from the archive.

By adding distrebuildcheck we workaround that issue by running a
maintainer-clean which also removes prebuild files.

Signed-off-by: René Nussbaumer <rn@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Signed-off-by: René Nussbaumer <rn@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Phew, it wasn't easy, but…

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Bernardo Dal Seno <bdalseno@google.com>

It seems that 'explicitely' is wrong, and that the right form is
'explicitly'. This is just fixing the typo plus adjusting affected
paragraphs.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

In case LUClusterVerifyGroup is run on a group which doesn't contain
the master node, the following could happen:

- master node is selected due to the explicit check
- if the order of nodes in the 'absent_nodes' list is such that the
  master node is the first in it, then we'll select (again) the master
  node
- passing duplicate nodes to RPC calls will break due to RPC
  internals; this should be fixed separately, but in the meantime we
  just refrain from passing such duplicates

This patch should not change the semantics of the code, since it
wasn't guaranteed even before that we find a vm_capable node.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Bernardo Dal Seno <bdalseno@google.com>

Additionally, we run hbal if the htools tests are enabled (new
key). Note that hbal will directly exit, since there are no instances,
but at least it will load and parse the group details.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

Commit 904b3bfe tried to fix the deletion of custom ndparams from
group, but instead broke both modification and deletion: because we
run ForceDictType on self.op.ndparams instead of the updated
new_ndparams, we can neither delete nor set properly spindle_count
(since it won't be coerced to int).

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

* commit 'v2.5.2':
  Fix RST formatting in NEWS file
  Update NEWS and bump version for release 2.5.2
  Fix boot=on flag for CDROMs
  KVM: only pass boot flag once

Conflicts:
        NEWS         (trivial, merged the entries)
        configure.ac (trivial, kept ours)

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Bernardo Dal Seno <bdalseno@google.com>

*FileID is interpreted as a start-of-bold, without corresponding end
marker. Sorry for not catching it in the first place.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Balazs Lecz <leczb@google.com>

This is a trivial release, with just bug fixes, so a small change log.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

This generalises commit 4304964a to cdroms too, since they have
somewhat the same logic. We just abstract the needs_boot_flag into a
separate variable, and then reuse it in the cdrom section.

Note that the logic of what 'if=' type to pass to KVM was very
convoluted, and (I think) incorrect; I went and cleaned it to be more
consistent.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

This addresses issue 230: passing two methods of booting to KVM can,
depending on the KVM version, confuse it.

Note that commit 4304964a introduced a partial fix for this (but only
for disks, and keyed on KVM versions). However, it didn't fix cdrom
booting, which still fails with the same error, so let's fix it more
generically; we still leave the per-disk check since that is about
-boot c versus -drive …,boot=on rather than two boot methods.

Patch is based on the one submitted by Vladimir Mencl, many thanks!

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

Currently, the order of commands in the bash completion file is
random, because the sub-commands are not sorted. This makes it harder
to investigate the differences in packaged Ganeti or in installed
Ganeti, since chunks in this file will have a random order.

To fix this, we sort the subcommands based on the first subcommand in
a given group ('first' also in sorted order); this results in a stable
contents of file, as tested by building it many times and checking for
differences.

The patch also does a few other minor changes to the file
(e.g. updating copyright years, etc.).

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

Signed-off-by: René Nussbaumer <rn@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Another release candidate is coming.

Signed-off-by: René Nussbaumer <rn@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Signed-off-by: René Nussbaumer <rn@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

On node groups we don't have the std field. However, the InstancePolicy
object always verifies that the std value is within a given range. As we
fill it up with defaults if not set (as it happens to be on node groups)
and the min value is higher than the default std value (taken from
constants.py) we fail.

We overcome this situation by simply let the function know if we want to
verify the std value at all. If we don't want to verify std, we just set
it to a compliant value (min_v) and continue.

We also slightly adapt the error message provided, as we don't have std
values on groups.

Signed-off-by: René Nussbaumer <rn@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Sorry, I forgot that with GenerateTable this needs to be handled
manually. Fixed now and tested in both ways.

(But to be honest, this should be abstracted in GenerateTable, instead
of the 'if' test in all its callers.)

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: René Nussbaumer <rn@google.com>

This will be run only if 'haskell-confd' QA configuration has been
enabled.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Agata Murawska <agatamurawska@google.com>

This uses confd to query the DRBD minors, which is very special; no
other command currently does so.

Since the backend is only implemented in the Haskell version of confd,
we have checks that 1) confd is enable, and 2) hs confd is also
enabled. If by mistake people do manage to query Python confd, the
error message will be clean:

  Query gave non-ok status '2': not implemented

So nothing breaks in an "ugly" way.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Agata Murawska <agatamurawska@google.com>

This can be queried remotely since it's a pure configuration query.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: René Nussbaumer <rn@google.com>

This is not implemented currently.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: René Nussbaumer <rn@google.com>

This fixes an old FIXME. Since we now how actual DRBD configuration
data, we can finally compute the instance's secondary nodes.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: René Nussbaumer <rn@google.com>

This is a complex field, so we have to do a lot of manual work for now.

The complexity arises from the fact that the contents of the field,
and the way to parse it, depends on the disk type field, so we don't
have a single, static way of parsing it. Hence we needed the
extensions to the Template Haskell code.

Since we now can both load and save the disk type, we can remove the
in-memory (duplicate) disk type from the disk objects, relying only on
the logical ID to hold the type information.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: René Nussbaumer <rn@google.com>

It seems this was not updated since the move to static minors…

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Agata Murawska <agatamurawska@google.com>

Currently, we only allow field-by-field de-serialisation. Since we
have cases where information about how to un-serialise a field is
split across two JSON fields (e.g. disk type and disk logical_id,
hypervisor and hvparams, etc.), we need to pass the entire object to
custom read functions.

Furthermore, since we will have to generate two actual fields from the
single in-memory field, we need to extend the custom save function so
that they can generate additional fields beyond the "main" field value
they currently generate.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Agata Murawska <agatamurawska@google.com>

Instead of passing an expression (which cannot come from the current
module), we pass a name, which is allowed to reference functions from
the module we're in. Since we currently don't have custom fields, we
don't need to modify any callers.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Agata Murawska <agatamurawska@google.com>

This uses the recently-moved functions to implement partial lookup of
names on getNode and getInstance, similar to the Python codebase.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Agata Murawska <agatamurawska@google.com>

Currently, the LookupResult, MatchPriority and related functions are
locate in Loader.hs, since (so far) only hbal needs them in the
selection of instances. However, with the new functionality on confd
side, we need these functions there too, but we don't want to import
Loader.hs (which pulls in lots of balancing-related code). So we move
all these function to BasicTypes.hs, since that module is a leaf one,
with no other dependencies.

Unittests are slightly adjusted (but they are still tested under the
'Loader' group).

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Agata Murawska <agatamurawska@google.com>

This is not used, as we need a more complex serialisation, which is
done in the saveObjectField function.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Agata Murawska <agatamurawska@google.com>

Commit cce46164 fixed upgrading from other 2.6 versions, but
accidentally broke upgrading from 2.5 (disk.params was left as None,
which breaks FillDict). The simplest way to handle params is to always
set them to an empty dict (disregarding what they currently contain).

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: René Nussbaumer <rn@google.com>

While looking at the testability of this piece of code, I found another
consistency problem. We have two if branches instead of one, with
elif's.

Signed-off-by: René Nussbaumer <rn@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

This inconsistency was found during rebalancing. Hbal failed because,
Ganeti couldn't load the opcode. After digging through the cause, an
inconsistency with the "args" field in the LUXI protocol was triggered
by the TemplateHaskell side where it's done uniformed.

For SubmitJob and SubmitManyJobs we treat args as one argument,
containing the job definition. In every other LUXI call args is actually
a list of arguments. This patch fixes this consistency.

This change is NOT backwards compatible.

Signed-off-by: René Nussbaumer <rn@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

This bug was found during disk parameter debugging. While looking at the
config some values seem present on the disk parameters, but that's not
expected behaviour. This patch fixes this, and also fixes the "broken"
configs automatically upon masterd restart.

Signed-off-by: René Nussbaumer <rn@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>