Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

When a node is running KVM instances and that node is rebooted or
shutdown, the gnt-noded daemon is finished and leaves the KVM instances
running. Latter on in the shutdown process, all remaining processes
receive SIGTERM as usual, meaning that the KVM instances are all
terminated, without running a proper shutdown procedure inside the
guests.

When using Xen, the xendomains script will take care of gracefully
powering down the instances, but for KVM there is nothing like that.

This patch adds an script that sends the "system_powerdown" command to
all running instances, and it could be useful for people using KVM.

This patch is a response for issue #126

Signed-off-by: Miguel Di Ciurcio Filho <miguel.filho@gmail.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

* devel-2.3:
  Fix rename for file-backed instances

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

* devel-2.2:
  Fix rename for file-backed instances

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

* stable-2.2:
  Fix rename for file-backed instances

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Currently the code wrongly changes the disk logical/physical id
component representing the path from "$storage_dir/$iname/disk$seq" to
"$storage_dir/$iname/disk/$seq" (note the additional slash) breaking the
rename.

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: René Nussbaumer <rn@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Signed-off-by: René Nussbaumer <rn@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

This was due to a older review which used GetOobProgram but then
changed to GetNdParams. Forgot to adjust this in the LU before.

Signed-off-by: René Nussbaumer <rn@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Signed-off-by: René Nussbaumer <rn@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Signed-off-by: René Nussbaumer <rn@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Use the simplified command and rapi version to perform an instance
rename to the same name. This is performed anytime the rename test is
enabled, while the "other-name" rename is performed when also an
alternative name is provided.

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

The current instance rename qa testing function can only perform
back-and-forth renames, both for command line and rapi. In order to be
able to perform same-name rename tests we change it to be able to
perform simple renames, and then we change qa to call it to perform both
sides of the renaming.

The same change is applied both to the local and the rapi test.

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

This basically is a no-op in ganeti, but forces the execution of the
os-specific rename scripts.

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

Signed-off-by: Adeodato Simo <dato@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

Signed-off-by: Adeodato Simo <dato@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

Signed-off-by: Adeodato Simo <dato@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

The defaults are filled in from the node group defaults, not cluster
defaults (presumably copy & paste error).

Signed-off-by: Adeodato Simo <dato@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

If the client requests certain names, their order should be maintained.
This is already done for instance queries. Moving this part into a
separate function allows sharing code.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Adeodato Simo <dato@google.com>

- Show only field definition, not callback when a result row is
  inconsistent
- Show list of duplicate titles if there are any (module load time)

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Adeodato Simo <dato@google.com>

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Adeodato Simo <dato@google.com>

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Adeodato Simo <dato@google.com>

This is a single function that tests all of of the following:

  - creating groups
  - creating groups that exist fails
  - renaming an empty group
  - renaming a group with nodes
  - renaming to a name that already exists fails
  - removing an empty group works
  - removing a group with nodes fails

The "default" group is only used for the "rename group with nodes"
test.

Signed-off-by: Adeodato Simo <dato@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Signed-off-by: Adeodato Simo <dato@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

Signed-off-by: Adeodato Simo <dato@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

Also, minor update to the 2.3 design doc, which was indicating the remove
operation would be `gnt-group del` and not `gnt-group remove` (the latter
being consistent with gnt-node and gnt-instance).

Signed-off-by: Adeodato Simo <dato@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

Signed-off-by: Adeodato Simo <dato@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

Signed-off-by: Adeodato Simo <dato@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

Signed-off-by: Adeodato Simo <dato@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

Signed-off-by: Adeodato Simo <dato@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

In particular:

  - add AddNodeGroup and RemoveNodeGroup in config.py

  - refactor _UpgradeConfig to make use of _UnlockedAddNodeGroup

  - add support for objects.NodeGroup in ConfigWriter.Update; add missing
    "serial_no" attribute to NodeGroup objects

  - update NodeGroup.UpgradeConfig to set mtime and serial_no if missing
    (the refactored code in _UpgradeConfig was not settting mtime nor ctime)

Signed-off-by: Adeodato Simo <dato@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

Register OpCode and Logical Unit in mcpu.py

Signed-off-by: René Nussbaumer <rn@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

Signed-off-by: René Nussbaumer <rn@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

This makes _GetWantedNodes consistent wit _GetWantedInstances.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Adeodato Simo <dato@google.com>

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Adeodato Simo <dato@google.com>

In particular:

  - break as couple lines that were longer than 80 characters
  - fix a couple "comma not followed by a space"
  - fix an unused variable warning

Signed-off-by: Adeodato Simo <dato@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

This also changes masterd to initialize the ganeti's manager with the
current list of nodegroup uuids, and updates unittests

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

This has been deprecated and unused since 2.1.

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

The current syntax when defining a NIC uses a pair of arguments, like this:

-net tap,vlan=0 -net nic,vlan=0,model=virtio

When using this pair, internally KVM will create a VLANState structure to send
ethernet frames between the guest NIC and the host tap device. This is
suboptimal and is going to be removed in the future. Plus, this combination
breaks vhost-net support.

The new syntax does not need the vlan craziness anymore, creating a direct 1:1
relationship between the backend device and the frontend device.

-netdev tap,id=netdev0 -device virtio-net-pci,mac=52:54:00:56:6c:55,netdev=netdev0

The current code does not verify if vhost_net is available before starting an
instance. All this tests are done verifying the KVM version installed on the
node.

Signed-off-by: Miguel Di Ciurcio Filho <miguel.filho@gmail.com>
Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

The current code returns the major, minor and rev portions of the version of
KVM as strings. Returning them as integers makes it easier to compare.

Signed-off-by: Miguel Di Ciurcio Filho <miguel.filho@gmail.com>
Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>