Currently we only symlink this into two hard-coded directories, which
breaks the source code viewing for all the others.

The patch replaces this with automatic building; as playing with
relative symlinks is non-trivial, I just generate it many times (the
file is small enough (<250) that it shouldn't matter, size-wise, and
it takes 2ms to do it).

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michele Tartara <mtartara@google.com>

This should help a lot of users, since pylint 0.21.1 was quite an old
version…

The tree is "clean" w.r.t. the new pylint version.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michele Tartara <mtartara@google.com>

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michele Tartara <mtartara@google.com>

Currently the Python source constants are used as-is, which is not
nice on the eyes (especially for unqualified names, it was hard to
separate them visually).

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michele Tartara <mtartara@google.com>

This patch does multiple enhancements to the way we build the Haddock
docs, motivated by the fact that if we don't run Haddock over test
files as well, bad formatting can be submitted and will accumulate
over time (without any checks).

The patch does:

- replace manual built ALL_APIDOC_HS_DIRS with automatically built one
  (from HS_DIRS)
- change Haddock so that it runs from the top directory (instead of
  from src/)
- change HsColour target file to be built via bash parameter
  substitution, rather than sed (I don't know how to do it in one go,
  so I use 2 intermediate variables)
- change 'hs-apidoc' target so that it depends on the real target
  file; in case no source file has been modified, running 'make
  hs-apidoc' twice will not result in two runs
- run HsColour/Haddock under en_US.UTF-8 locale, otherwise they can't
  parse correctly the Unicode chars in the test files

Additionally, wrong formatting (oops) in a test file has been
corrected.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michele Tartara <mtartara@google.com>

Two test helper files didn't have export lists (lost during the split
of tests). This patch finally reintroduces them, to hopefully make the
export list saner and with fewer changes for purely-internal changes.

Additionally, a few missing docstrings are added as well.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michele Tartara <mtartara@google.com>

When file storage is disabled at ./configure time, we shouldn't pass
opcodes containing DTFile/DTSharedFile/StorageFile to Python for
validation, as they will fail.

This patch implements this by simply tweaking the Arbitrary instances
for DiskTemplate and StorageType (which IMHO is a nice and clean
way!), and also fixing the generation of arbitrary IPolicies to use
the correct 'allDiskTemplates' list (otherwise we'd loop forever
trying to generate a list of all templates).

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michele Tartara <mtartara@google.com>

Currently QA tries to use “gnt-node list-storage” with all storage
types, but when file storage is disabled this will fail.

The patch changes it so that if file storage is disabled, we test that
indeed fails, and otherwise we include it in the regular tests.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michele Tartara <mtartara@google.com>

It turns out that, in Python, booleans are also integers. So they fall
under the “isinstance(value, int)” case, resulting in all enable*
constants being integers in Haskell, which is not nice, even though
we're not using them directly today.

Patch simply adds a special casing for booleans, before integers.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

The vcluster changes broke the disabling of file storage; we can
workaround by (manually) skipping the virtualisation of file storage
paths if they are not enabled.

Note that tests/QA are still broken with disabled file storage; this
patch only fixes production code.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

In a few cases, we tested the verbosity level for (== 0), instead of
higher/lower than a certain value. If the user passes multiple
"--quiet" options, this can result in negative verbosity levels, which
behave like "extra verbosity".

Sigh for plain data types as opposed to proper verbosity levels…

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

Change the docstring of chompPrefix to prevent the error
"doc comment parse failed" that was raised by some version of
haddock while generating the documentation for this function.

Signed-off-by: Michele Tartara <mtartara@google.com>
Reviewed-by: Helga Velroyen <helgav@google.com>
(cherry picked from commit 94042ae4)

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Bernardo Dal Seno <bdalseno@google.com>

Currently, the iallocator interface requires LVM storage, due to the
way it computes the node storage information.

By changing the code to understand that GetVGName() can return None,
and by setting the disk_total/disk_free node parameters to the value
zero, we can workaround this issue until proper multi-storage
reporting is implemented.

The hail iallocator plugin works without changes once this is
implemented, as it already handles non-LVM storage as "foreign"
storage (with unlimited capacity).

The patch also changes a bit how the parameters are retrieved and
used; hopefully this is a bit safer and more readable.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

'MakeLegacyNodeInfo' is not the best place for this, but we'd have to
duplicate it if we wanted a LVM-less version, so the easiest is to add
an optional parameter that allows it to accept/skip LVM-less results.

It still requires at most one VG result, so its behaviour isn't
changed in this respect.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

This is similar to commit 8775e62a; the addition of node_whitelist
broke this LU as well.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Bernardo Dal Seno <bdalseno@google.com>

If cluster is initialized with --no-lvm-storage then volume_group_name
does not exist in config.data. Thus we must define it as optional in
confd.

Signed-off-by: Dimitris Aragiorgis <dimara@grnet.gr>
[iustin@google.com: fixed Haskell RPC definition]
Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Passing --net 0:add,ip=5.5.5.5 failed due to a reference
of a non initialized variable (new_net_obj). Reorder the checks
and add some comments to be readable.

Signed-off-by: Dimitris Aragiorgis <dimara@grnet.gr>
Reviewed-by: Guido Trotter <ultrotter@google.com>

Thanks Michael for pointing out the error!

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

The document doesn't mention which certificates need to be passed as
ca-file, so let's try to clarify that.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

Remove any early returns in LUNetworkDisconnect/LUNetworkConnect
and replace them with if-else statements.

Signed-off-by: Dimitris Aragiorgis <dimara@grnet.gr>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

In this method self.tags might be None and cannot be used
in join(). Use GetTags instead.

Signed-off-by: Dimitris Aragiorgis <dimara@grnet.gr>
Reviewed-by: Guido Trotter <ultrotter@google.com>

networks config objects have UUIDs and thus should be included
in _AllUUIDObjects().

Signed-off-by: Dimitris Aragiorgis <dimara@grnet.gr>
Reviewed-by: Guido Trotter <ultrotter@google.com>

Locks for group instances are aquired only if conflicts are checked.
To this end we must _CheckNodeGroupInstances() only then otherwise
this check will always fail (owned_instances will be []).

Signed-off-by: Dimitris Aragiorgis <dimara@grnet.gr>
Reviewed-by: Guido Trotter <ultrotter@google.com>

Params passed in _CreateNewNic() are not yet evaluated and include
the value passed by user for the network. A lookup must be done first
in order to find the corresponding network UUID which should be stored
in the newly created NIC object.

Params passed in _ApplyNicMods() include the value passed by user
for the network. Thus a lookup must be done first in order to find
the corresponding network UUID. Then compare it with the existing
value and act accordingly.

Signed-off-by: Dimitris Aragiorgis <dimara@grnet.gr>
Reviewed-by: Guido Trotter <ultrotter@google.com>

… no comment :)

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Helga Velroyen <helgav@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

LUNetworkConnect/LUNetworkDisconnect, in case locking is used, might
lock instances that exist in the requested node group. The acquired
locks should be checked if they are correct at the beginning of
CheckPrereq() via _CheckNodeGroupInstances().

Signed-off-by: Dimitris Aragiorgis <dimara@grnet.gr>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michele Tartara <mtartara@google.com>

Commit b6ad806f contained a date a month in the future. With this patch
all release dates in NEWS may at most be three days into the future
(assuming the build machine's clock is correct).

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

February 2, 2013 was a Wednesday, not a Thursday.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Helga Velroyen <helgav@google.com>

Commit b6ad806f used a wrong date.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Helga Velroyen <helgav@google.com>

Make LookupNetwork() return None in case target is None. This fixes
Issue 380. Rapi passes network=None and the lookup should not fail.

Make network client aware of new nic.network.gnt-network info shows
the IPs of each instance inside the network.  It parses nic.networks
field of QueryInstances() output, which now is a list of uuids an
not names.

Signed-off-by: Dimitris Aragiorgis <dimara@grnet.gr>
Reviewed-by: Helga Velroyen <helgav@google.com>

In case a NIC is not inside a network then netinfo None. Thus
netinfo["name"] fails.

Signed-off-by: Dimitris Aragiorgis <dimara@grnet.gr>
Reviewed-by: Helga Velroyen <helgav@google.com>

As far as I could see, the ability to allocate multiple instances via
RAPI was not mentioned at all. A superfluous word is also removed.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

This gets all network info from config_data and parses
all instances and their NICs and makes the substitution.

Signed-off-by: Dimitris Aragiorgis <dimara@grnet.gr>
Reviewed-by: Helga Velroyen <helgav@google.com>

In backend NICs arrive with netinfo filled. If nic.network is not None
nic.netinfo is not too. Thus all the info is derived from HooksDict()
and nic.network must not be checked.

Signed-off-by: Dimitris Aragiorgis <dimara@grnet.gr>
Reviewed-by: Helga Velroyen <helgav@google.com>

This was before the case too. Now is bit trickier because nic.network
is uuid. Info must derive from nic.netinfo.

Signed-off-by: Dimitris Aragiorgis <dimara@grnet.gr>
Reviewed-by: Helga Velroyen <helgav@google.com>

Signed-off-by: Dimitris Aragiorgis <dimara@grnet.gr>
Reviewed-by: Helga Velroyen <helgav@google.com>

This is needed in case more info than each nic's network uuid is to
be returned. We need to lock networks to get valid data. For now
only the name is returned as an extra field. All other can be added
with trivial effort.

Signed-off-by: Dimitris Aragiorgis <dimara@grnet.gr>
Reviewed-by: Helga Velroyen <helgav@google.com>

Queries now return the network uuid as well as it's name. Here we
only use info provided be LUInstanceQueryData context.

Signed-off-by: Dimitris Aragiorgis <dimara@grnet.gr>
Reviewed-by: Helga Velroyen <helgav@google.com>

Make _InstanceQuery gather all network info related to instance's
NICs and in case of NETQ_INST in _NetworkQuery get all network
uuids directly from nic.network

Signed-off-by: Dimitris Aragiorgis <dimara@grnet.gr>
Reviewed-by: Helga Velroyen <helgav@google.com>