Some tests had wrong assumptions on the instance status and some
needed explicit start or stop commands.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Start using “InstanceCheck” decorator where appropriate. Use direct call
for check in places where the instance status changes during the test.

The parameters of “TestInstanceImport” had to be re-ordered to have the
instance as the first argument.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Hopefully these will be the last ones…

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

After looking again at the QA speeds, it turned out that instance
rename was run 12 times via the command line and 12 times via RAPI;
outside of start/stop which we need for maintenance during QA, this is
the most used test.

This patch does a few changes with regard to instance rename:

- it changes rename functions to rename the instance back to the
  original name
- which allows us not to run said functions twice, A→B and then B→A

This brings down the number of rename tests from 12 to 8 (for both
cmdline and RAPI).

Furthermore, the CLI rename test was doing too many actual instance
renames (at Ganeti level), so we rework it to be simpler (brings down
the average duration from ~27s to ~21s), and we reorganise the run of
various tests such that we do fewer instances start/stop tests (10
instead of 14).

Overall we only gain about 3 minutes (~7%), but still it's a speedup.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: René Nussbaumer <rn@google.com>

test modification of either parameter, but also both at once.

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Stephen Shirley <diamond@google.com>

Commit d1c172de inadvertently changes the
“/2/instances/[instance_name]/replace-disks” resource to use body
parameters. There were no QA tests and the issue wasn't noticed.

This patch re-introduces support for query parameters and adds a QA
test.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Andrea Spadaccini <spadaccio@google.com>

This would have detected the issue fixed in the previous patch.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: René Nussbaumer <rn@google.com>

In version 0.21, pylint unified all the disable-* (and enable-*)
directives to disable (resp. enable). This leads to a lot of
DeprecationWarning being emitted even if one uses the recommended
version of pylint (0.21.1, as stated in devnotes.rst).

This commit changes all the disable-msg directives to disable.

Signed-off-by: Andrea Spadaccini <spadaccio@google.com>
Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

s/'/"/ in (hopefully) the right places.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

No idea why this was missed before.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: René Nussbaumer <rn@google.com>

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: René Nussbaumer <rn@google.com>

- Test OS lists via command line and RAPI
- Test “gnt-os diagnose” and “gnt-os info”

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Currently the QA rename job wrongly passed the whole info dict to the
client.

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

This tests at least the basic case, unfortunately there is no way to
check all possibilities using the provided rapi client, as that will use
the new method unless the cluster doesn't support it.

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: René Nussbaumer <rn@google.com>

Right now, the QA code is not covered by pylint, and this shows at
least one low-impact bug.

This patch does the necessary changes to make QA pylint-clean, and the
changes the makefile to run pylint for it.

Notable changes:

- qa_utils.GenericQueryTest: randfields was not used at all, and my
  belief is that it was indented to be used in order not to modify the
  input list; so I replaced randfields with fields, so we only shuffle
  the our local copy
- qa_node.TestOutOfBand was using it's own copy of AcquireNode(), so I
  replaced it with the existing version
- qa_os: was using 'dir' in a couple of places, replaced with dirname

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

This adds QA tests for the SetGroupParams operation, both for CLI and
RAPI. Additionally, it adds tests for add/rename/remove groups via RAPI,
which had not been included in a previous patch series. Finally, it also
tests setting "alloc_policy" (and, for the CLI, "ndparams") at group
creation time.

Signed-off-by: Adeodato Simo <dato@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

This can be set at group creation time and via OpSetGroupParams. The default
is "preferred", and existing node groups from previous Ganeti version will
get the attribute set to this value.

Signed-off-by: Adeodato Simo <dato@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

The current instance rename qa testing function can only perform
back-and-forth renames, both for command line and rapi. In order to be
able to perform same-name rename tests we change it to be able to
perform simple renames, and then we change qa to call it to perform both
sides of the renaming.

The same change is applied both to the local and the rapi test.

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Signed-off-by: Adeodato Simo <dato@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

This adds QA tests for both CLI and RAPI.

Signed-off-by: Adeodato Simo <dato@google.com>
Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

This tests the HTTP Not Found and Not Implemented errors.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

This time, we re-establish the old pri/sec nodes corretly. Unfortunately this
will require now a 3-node cluster at least for drbd instances, hence it's
somewhat suboptimal, but… The other option would be to move it simply from p:s
to s:p and then back to p:s, without involving a third node (for DRBD case),
but I think that moving it to a completely separate node is slightly better for
testing.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

The instance move tests were moving the instance from node pair (A,_) to
(B, A), and left it there. This patch makes sure that the first step
moves the instance to (B,A) but the second one back to (A,B), so that
the instance is left on the same primary node.

The original secondary node is lost though, if I read the code
correctly.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

This will make this test work again.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

This ensures tag operations work via RAPI. Also print requested URI to
stdout for debugging.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

If no function to verify the result was specified, qa_rapi._DoTests
wouldn't return the result.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

This introduces a new instance status field, named "oper_vcpus".
It contains the actual number of VCPUs an instance is using as
seen by the hypervisor.

Signed-off-by: Balazs Lecz <leczb@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Currently the RAPI client uses the urllib2 and httplib modules from
Python's standard library. They're used with pyOpenSSL in a very fragile
way, and there are known issues when receiving large responses from a RAPI
server.

By switching to PycURL we leverage the power and stability of the
widely-used curl library (libcurl). This brings us much more flexibility
than before, and timeouts were easily implemented (something that would
have involved a lot of work with the built-in modules).

There's one small drawback: Programs using libcurl have to call
curl_global_init(3) (available as pycurl.global_init) while exactly one
thread is running (e.g. before other threads) and are supposed to call
curl_global_cleanup(3) (available as pycurl.global_cleanup) upon exiting.
See the manpages for details. A decorator is provided to simplify this.

Unittests for the new code are provided, increasing the test coverage of
the RAPI client from 74% to 89%.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

This test moves an instance on the same cluster and, if successful,
moves it back. While not testing a real move between two clusters,
this is certainly better than nothing.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

Two new resources are added:
- /2/instances/$name/prepare-export
- /2/instances/$name/export

The documentation for the existing resource for creating instances is updated
for remote imports. The RAPI client is extended for the new resources.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>