Signed-off-by: René Nussbaumer <rn@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Signed-off-by: René Nussbaumer <rn@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Signed-off-by: René Nussbaumer <rn@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Similiar to blockdev_create we sometimes do find on children. This fixes
those cases. However, this is not very nice.

Signed-off-by: René Nussbaumer <rn@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

This is due to the nature of bdev. We spread some logic into cmdlib and
deal for example with it's children recursively. This makes it hard to
annotate the disk parameters in a generic way as we don't always deal
with the top most disk. But the disk parameters are depending on the top
device not on the children.

Signed-off-by: René Nussbaumer <rn@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Signed-off-by: René Nussbaumer <rn@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Signed-off-by: René Nussbaumer <rn@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

The following (blockdev) RPC calls are not converted yet (as they are
not straight forward or need more research):

* bdev_sizes
* blockdev_remove
* blockdev_shutdown
* blockdev_removechildren
* blockdev_close
* blockdev_getsize
* drbd_disconnect_net
* blockdev_rename (has already a special encoder, needs further research
  if needed at all)
* blockdev_getmirrorstatus (not sure if we have everywhere a clear link
  to the instance the disk belongs)
* blockdev_getmirrorstatus_multi (same here, further research)

Then special cases where we take care later in the patch series:

* blockdev_create (special cased)
* blockdev_find (special cased, like blockdev_create)

Signed-off-by: René Nussbaumer <rn@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

We change the cmdlib side on the next patch.

Signed-off-by: René Nussbaumer <rn@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Signed-off-by: René Nussbaumer <rn@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Signed-off-by: René Nussbaumer <rn@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Signed-off-by: René Nussbaumer <rn@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Signed-off-by: René Nussbaumer <rn@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Start using “InstanceCheck” decorator where appropriate. Use direct call
for check in places where the instance status changes during the test.

The parameters of “TestInstanceImport” had to be re-ordered to have the
instance as the first argument.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

This script can be used to check if an instance is running or stopped at
various points during a QA run. Environment variables are used to pass
the most essential information.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Until now this wasn't possible.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Currently we allow for up to NODE_MAX_CLOCK_SKEW time difference
between nodes in some operations, but not everywhere: SSL certificate
verification (import/export, both intra and inter-cluster) has a zero
limit (downwards), and a week upwards. This can cause even
intra-cluster backup problems, if the source node has a time even two
seconds in the future.

To fix this, when we verify certificates compare with a time offset
with the max skew, which fixes the lower bound and reduces the upper
bound by an insignificant amount (0.04%).

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

The pyeval role generates literal (e.g. ``OP_CLUSTER…``) formatting,
which differs from the other headers. This is confusing, so let's add
a note that these are virtual operations, which makes the output more
consistent.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

This patch adds a hand-coded decoder for LuxiCall arguments, as the
data-structure is not uniform enough for automated generation (even
for the serialisation, we had to add hints for some fields,
de-serialisation is even harder).

It also fixes a tiny issue with WaitForJobChange job ID encoding, and
adds unittests for the encoding/decoding of LuxiOp structures.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: René Nussbaumer <rn@google.com>

In preparation for unit-testing the Luxi definitions, this improves
the auto-generation of OpCodes: currently this uses unbounded plain
Strings for names and fields, and this creates too big test sizes
(e.g. when automatically generating job sets).

Furthermore, there are some more cleanups: switching from liftM to
applicative style for easier definition, and some improvements in
generators.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: René Nussbaumer <rn@google.com>

We currently auto-generate a LuxiOp data type, which holds the entire
operation (including parameters). However, having a data type just for
the method call would be useful, so let's change THH to also
defineSADT for the Luxi constructors.

Currently I don't know how to match automatically a LuxiReq to its
LuxiOp counterpart (not even sure we need that), so any matching will
remain manual.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: René Nussbaumer <rn@google.com>

Now that luxi.py constants are exported, we can use them for more
consistency.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: René Nussbaumer <rn@google.com>

I was wondering why my changes to luxi.py did not trigger the rebuild…

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: René Nussbaumer <rn@google.com>

Two Luxi calls have inconsistent an name/value mapping (in the Python
code):

- REQ_AUTOARCHIVE_JOBS versus AutoArchiveJobs (versus AutoarchiveJobs)
- REQ_QUEUE_SET_DRAIN_FLAG versus SetDrainFlag (no Queue)

While these are only a consistency issue, let's fix them so that the
Haskell code (which uses the auto-generated camel-case form) doesn't
need to handle them case specially, and looks more like the Python
code (hah, joke!).

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: René Nussbaumer <rn@google.com>

And its associated unittests.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: René Nussbaumer <rn@google.com>

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: René Nussbaumer <rn@google.com>

This adds a bit of dumb mapping of values to names, while trying to be
safe. This is the best we can do without resorting to parsing or
interpreting ASTs.

The difference in the output is:

 -- | Converted from Python list or set ADMINST_ALL
 adminstAll :: [String]
-adminstAll = ["down", "offline", "up"]
+adminstAll = [adminstDown, adminstOffline, adminstUp]

Since for most such values we use strings, we don't gain in type
safety on the Haskell side. But it makes the output more readable and
it might open up other opportunities later.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

This add support for exporting constants from multiple modules (as
opposed to hard-coding constants), and also makes the output more
readable by skipping things we know for sure we don't want to convert
(as opposed to things we would like to but don't know _how_ to
convert).

Additionally, we export the constants from the luxi module too.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

The file was there and listed in Makefile.am, but I forgot to add it to
commit a0c3e726.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: René Nussbaumer <rn@google.com>

The “RunTestIf” uses an AND association between the passed test names,
so the instance would be be shut down if both rename and reinstall were
enabled. Since this is not necessarily the case, OR must be used.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Until now “TestRunIf” and “TestEnabled” could only handle AND. With this
patch a new class named “Either” is added to “qa_config” and allows OR.
The name “Either” was chosen instead of “Or” as the latter is very close
to the reserved keyword “or”.

Examples:
  ["rapi", Either(["instance-rename", "instance-reboot"])]

  Either(["node-list", "instance-list", "job-list"])

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Commit 30d25dd8 moved the htools code to new-style exception handling,
but the hconfd code hasn't been, which fails when compiling on newer
GHC versions.

This patch does the rest of the move; however, the situation is not
very nice, we should have a better way to handle this (introduce
catchIO? or something like that).

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Bernardo Dal Seno <bdalseno@google.com>

The reason why grow-disk was doing:

$ gnt-instance grow-disk instance3 0 -64
Unhandled Ganeti error: Invalid format

Is because it does it's own ParseUnit call, and doesn't transform that
into a nicer message.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: René Nussbaumer <rn@google.com>

Since we use a testutils.InputTestClient(), then the actual error
expected is VerificationError, and not GanetiApiError (which is used
at real run-time).

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: René Nussbaumer <rn@google.com>

So while testing my previous patch I run setup-ssh manually without
any arguments, and it did nothing (no complains, no messages,
anything). That was very surprising, so let's make it behave better if
no nodes are passed.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

This works around a problem in Paramiko, but which looks like it's a
Ganeti problem:

[cluster] root@node4:~# gnt-node add --readd node3
/usr/lib/python2.6/dist-packages/Crypto/Util/randpool.py:40:
RandomPool_DeprecationWarning: This application uses RandomPool, which
is BROKEN in older releases.  See http://www.pycrypto.org/randpool-broken


  RandomPool_DeprecationWarning)

To silence this, we do an ugly thing (since Python 2.4 doesn't support
context managers): manually reset the warnings filter, which resets
any -W command line flags (hopefully noone calls this tool manually so
often).

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

This script shows a few examples on how to use the RAPI input test
client. It is also run at “make check” time to ensure it's not
completely broken.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: René Nussbaumer <rn@google.com>

This patch adds a mock RAPI client to test input values to methods. All
methods either raise an exception if there was a problem or return None.
Third-party code can use this to test their input values to the RAPI
client.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

With this patch headers are constructed from the PycURL options
and passed to the mock implementation.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: René Nussbaumer <rn@google.com>