This is a small bug-fix only release.

Signed-off-by: Bernardo Dal Seno <bdalseno@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

Phew, it wasn't easy, but…

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Bernardo Dal Seno <bdalseno@google.com>

This is a trivial release, with just bug fixes, so a small change log.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

Signed-off-by: René Nussbaumer <rn@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Signed-off-by: René Nussbaumer <rn@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Signed-off-by: René Nussbaumer <rn@google.com>
Reviewed-by: Agata Murawska <agatamurawska@google.com>

Signed-off-by: René Nussbaumer <rn@google.com>
Reviewed-by: Agata Murawska <agatamurawska@google.com>

Commit 8a69b3a8 changed the DRBD barriers disabled by default if
“--disable-drbd-barriers” is used to “bfd”, where “d” stands for
disk-drain. DRBD's upstream updated their documentation[1] to
say disk drains should always be used.

[1] http://git.drbd.org/?p=drbd-8.3.git;a=commit;h=f952dcfed57acf



Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: René Nussbaumer <rn@google.com>

I've added the changes under beta1, not beta2, since it's easier to
keep it separate.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

Currently, the lint target does a sequential: pep8, pylint, pylint on
the QA sources. hlint is run only when explicitly requested.

This patch reorganises the lint target by:

- splitting the current lint target into separate pylint (slow),
  pylint-qa (fast), pep8 (fast) targets
- making lint itself depend on the above plus hlint
- both pep8 and hlint are optional, based on whether the said binaries
  were detected at configure time

make -j is slightly faster after this patch (1m18s → 1m7s).

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

Signed-off-by: René Nussbaumer <rn@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

This is needed so we can specify the xen command upon configure time

Signed-off-by: René Nussbaumer <rn@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Finally!

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

Also update NEWS file.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

If GHC_PKG_QUICKCHECK contains multiple values, the test would fail
with “too many arguments”.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

We switch from vmlinuz-2.6-… to vmlinuz-3-…. To do this nicely, we
also add a ./configure-time setting for the KVM instance kernel.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

This patch changes configure.ac Makefile.am so that the user can pass:

- --disable-confd (or --enable-confd=no) to disable it completely
- --enable-confd=yes or --enable-confd=python to select the
  traditional implementation (this is the default setting)
- --enable-confd=haskell to select hconfd

The only "not nice" thing is that I've chosen to keep the
hconfd.hs/hconfd name, and we rename it after install via an
install-exec-hook. The other choice is possible too (to rename the
source file/binary).

One additional note is that if we select haskell, the _rule_ for
creating daemons/ganeti-confd dissapears; whereas if we select python,
the rule for htools/hconfd still exists (one can build it explicitly),
it just is not installed. This is due to the different way in which
the rules are declared.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: René Nussbaumer <rn@google.com>

By accident, commit a002ed79 introduced the qemu-img checks in the
htools block. I found this also by mistake while investigating
another issue :)

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: René Nussbaumer <rn@google.com>

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

A later, more complete patch, will allow selecting between either the
Python version or the Haskell version. This is just a temporary
solution to help building without all the needed Haskell libraries.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Tests ending in "-runasroot" or "-runasroot.py" are run through fakeroot,
so activity that needs root privileges can be tested.

Signed-off-by: Bernardo Dal Seno <bdalseno@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

Add the disk-barriers and meta-barriers parameters described in the
design doc.

constants.py:
* add the needed LD and DT-level parameters, use the defaults provided
  at ./configure time;
* add constants representing which barriers should be disabled and the
  set of valid options.

lib/bdev.py:
* factor the barriers handling code to a class method, for testing
  purposes;
* implement the more granular version checking logic;
* use the LD level parameters;
* add stricter check on DRBD version (8.0, 8.2 or 8.3), as we do not
  support 8.4 yet.

lib/cmdlib.py:
* translate DT level parameters to LD level ones.

configure.ac, Makefile.am:
* set both disk and meta barriers parameters depending on the value of
  --enable-drbd-barriers.

test/ganeti.bdev_unittest.py:
* unit tests for the code that sets DRBD barrier parameters depending on
  the version.

doc/design-resource-model.rst:
* reword the description of meta-barriers;
* change all disk parameters names to use dashes instead of underscores.

Signed-off-by: Andrea Spadaccini <spadaccio@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

configure.ac:
* change the documentation of --with-lvm-stripecount parameter to
  reflect the change

doc/design-resource-model.rst:
* change drbd/stripes to drbd/data-stripes and drbd/metastripes to
  drbd/meta-stripes

rest of files:
* add the plain/stripes, drbd/data-stripes and drbd/meta-stripes disk
  parameters

Signed-off-by: Andrea Spadaccini <spadaccio@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Doesn't do anything yet.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: René Nussbaumer <rn@google.com>

Signed-off-by: René Nussbaumer <rn@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Signed-off-by: Agata Murawska <agatamurawska@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

Signed-off-by: Agata Murawska <agatamurawska@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

This was overlooked in the review, sorry.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

Also added optional affinity Python package for CPU pinning under KVM
to the INSTALL doc.

Signed-off-by: Tsachy Shacham <tsachy@google.com>
Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

This utility checks whether the code conforms to PEP8. Some checks had
to be disabled for Ganeti.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Signed-off-by: René Nussbaumer <rn@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

Also update NEWS file.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>