Until now, Ganeti started and stopped its own daemons using custom functions.
To start, the daemon was just executed and then sent the appropriate signals to
stop it again. Init scripts would have to pay attention to the PID file and
other things.

With this patch, a new script is added (“daemon-util”, installed in
$prefix/lib/ganeti/), centralizing the starting and stopping of daemons. The
provided example init script is adjusted to use this new script. Ganeti's code
no longer calls its own init script.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

Currently a few of the LU's CheckPrereq use utils.HostInfo which raises
a resolver error in case of failure. This is an exception from the
standard that CheckPrereq should raise an OpPrereqError if the error is
in the 'pre' phase (so that it can be retried).

This patch adds a new error code (resolver_error) and a wrapper over
utils.HostInfo that just converts the ResolverError into
OpPrereqError(…, errors.ECODE_RESOLVER). It then uses this wrapper in
cmdlib, bootstrap and some scripts.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

A newer version of pylint, more warnings…

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

This finishes the conversion of OpPrereqError creation to two-argument
style. Any leftovers as one-argument are not breaking anything, just
losing information about the errors.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

There was a race condition between starting the node daemon
and sending requests to write the ssconf files. With this
patch, the initialization waits up to ten seconds for the
node daemon to become responsive.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

This is particularily useful for “gnt-cluster redist-conf”, but
also for all other cases where the configuration files are
rewritten on other nodes.

$ gnt-cluster redist-conf
… Copy of file /var/lib/ganeti/config.data to node … failed: Error while
executing backend function: [Errno 1] Operation not permitted
… Error while uploading ssconf files to node …: Error while executing backend
function: [Errno 1] Operation not permitted

$ gnt-node modify --offline no --force node3.example.com
… - WARNING: Not enough master candidates (desired 10, new value will be 4)
… Copy of file /var/lib/ganeti/config.data to node node8.example.com failed:
Error while executing backend function: [Errno 1] Operation not permitted
Modified node node3.example.com
 - offline -> True
 - master_candidate -> auto-demotion due to offline

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Allows the initialization of a cluster without the creation or distribution
of SSH key pairs. Includes changes for LeaveCluster and RPC.

Signed-off-by: Ken Wehr <ksw@google.com>
Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

This patch does a little bit of cleanup first, since we want to call
GenerateUniqueID without reacquiring the lock.

Note that we don't necessarily need to do this for the cluster, since at
first startup ConfigWriter will do it anyway. But it's better to
explicitely do this instead of relying on the automated upgrade.

Additionally this patch adds ctime/mtime population at cluster init
time. mtime is not necessarily needed (master will update it
automatically, but we're doing it anyway for consistency).

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

Without this confd will not start when a node is added to the cluster.

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Copy pub_key in authorized_keys.

Signed-off-by: Luca Bigliardi <shammash@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

This survived QA, burnin and unittests.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Luca Bigliardi <shammash@google.com>

This patch adds ctime/mtime support to the “main” config objects - the
config data itself, and the cluster/nodes/instances objects.

These are not added on auto-upgrade, but rather should be migrated if it
makes sense when 2.0 is upgraded to 2.1.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>
(cherry picked from commit 022c3a0b)

If --no-etc-hosts is passed in at cluster init time we set a new
parameter in the cluster's object to false, and avoid adding nodes to
the hosts file. The UpgradeConfig function is used to set the value to
True, when upgrading from an old configuration version.

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>
(cherry picked from commit b86a6bcd)

When the parameter is set to True and start_daemons is also True,
ganeti-masterd will be started with the new --no-voting --yes-do-it
options.

This new option is set to True only on masterfailover, when no_voting is
used. This changed the behavior from 2.0, where we didn't start the
master daemon at all, when this option was used.

The manpage is also updated to remove the 2.0 only change.

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

This key is shared on all nodes (via cmdlib._RedistributeAncillaryFiles)
and will be used for HMAC authentication of confd messages.

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Currently we have both a default_hypervisor and an enabled_hypervisors
list. The former is only settable at cluster init time, while the latter
can be changed with cluster modify.

This becomes cumbersome in a few ways: at cluster init time for example
if we pass in a list of enabled hypervisors which doesn't include the
"default" xen-pvm one, we're also forced to pass a default hypervisor,
or an error will be reported. It is also currently possible to disable
the default hypervisor in cluster-modify (with unknown results).

In order to avoid this we get rid of this field altogether, and define
the "first" enabled hypervisor as the default one. This allows ease of
changing which one is the default, and at the same time maintains
coherency.

At configuration upgrade we make sure that the old default is first in
the list, so that 2.0 cluster defaults are preserved.

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

InitConfig currently creates the cluster config_data, then puts it into
a dict, passes it to SimpleConfigWriter to load it from a dict (which
just reuses the dict value) and then saves it. The SimpleConfigWriter is
then returned, but ignored. With this patch we just write out the
config_data at InitConfig time, and thus can remove SimpleConfigWriter
altogether. The now unused SimpleConfigReader.FromDict is also gone.

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

InitConfig returns a SimpleConfigWriter to InitCluster, which then
passes it on to ssh.WriteKnownHostsFile, which extracts a couple of
values from it. One line later the full ConfigWriter is initialized.

By initializing it one line before we can pass the full writer to
ssh.WriteKnownHostsFile, and thus we don't need to care anymore for the
InitConfig returned SimpleConfigWriter

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

When the parameter is set to True and start_daemons is also True,
ganeti-masterd will be started with the new --no-voting --yes-do-it
options.

This new option is set to True only on masterfailover, when no_voting is
used. This changed the behavior from 2.0, where we didn't start the
master daemon at all, when this option was used.

The manpage is also updated to remove the 2.0 only change.

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

This allows failing over in certain corner cases, such as a 2 node
cluster with one node down. The man page is also updated to document
this dangerous option and how to recover from this situation.

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

This was more tricky as the backend function is used by other function
in backend.py. As such, it must be handled specially - it must raise
always an exception and not simply return False, err.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

This patch converts this rpc call to the new style result, and also
changes in the process the meaning of the QuitGanetiException's
arguments and the node daemon rpc call exception handler.

The problem with the exception handler is that we used a two-stage one,
and the inner used to catch all exception (including this one), so in
the logs we always had an exception logged, instead of the normal
'leaving cluster message'. The patch also adds logging of the
exception's arguments, so that we have a trail in the logs about the
shutdown mode.

The exception's arguments were reversed from the normal RPC results
style. While it makes somewhat more sense for this exception, we change
them such that they match the rpc result format.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

This is used in multiple places outside cmdlib.py, so it's a more
interesting patch.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

And remove the -b option, as default nic parameters can be used instead.
We could support the option, but that would add more code, and since
cluster init is not a frequent operation, it's better to keep the code
clean.

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

This way the same constant can represent the default profile also for
nic, disk and OS parameters.

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

If --no-etc-hosts is passed in at cluster init time we set a new
parameter in the cluster's object to false, and avoid adding nodes to
the hosts file. The UpgradeConfig function is used to set the value to
True, when upgrading from an old configuration version.

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

This is for Python 2.6 compatibility.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

The current implementation of “gnt-cluster getmaster” doesn't work on
non-master nodes, which is a regression from 1.2. This patch implements
it (again) via ssconf.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Alexander Schreiber <als@google.com>

Some hypervisors (KVM) need RUN_GANETI_DIR to exist even at cluster init
time. This patch creates it in InitCluster just before hv parameter
checking. Since the code to make list of directories is already repeated
twice in the code, and this would be the third time, we abstract it into
an utils.EnsureDirs function and we call that one from ganti-noded,
ganeti-masterd and bootstrap.

Reviewed-by: iustinp