Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

Passing <quote> rather than ' avoids having special characters at the
beginning of the line, which man doesn't like.

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

The gnt-instance manpage only contained the correct syntax for xen-pvm.
Specify what the kvm syntax is, and also warn about a problem with
virtio+netboot, for older kvm versions.

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

This allows one to cleanly set a node offline and promote as needed
other nodes.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

This finishes the integration of per-os-hypervisor parameters by updating
the man page.

Signed-off-by: René Nussbaumer <rn@google.com>
Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

This switches gnt-node to the new opcode, and in the process also
enables multi-node arguments for it.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

This reverts commit 83d9f436.

man is still unable to wrap some long lines, so we simply revert this patch
(and filter out the specific message in autotools/check-man).

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

A long PREFIX variable (to configure) will result in very long
LOCALSTATEDIR, which when concatenated with lib/ganeti/ (and even more
items under it) will go over the 80 char line length we enforce in the
man checker.

To workaround this, we change two things:

- use a specific REPLACE_VARS_MAN which adds breaking points after each
  slash in paths
- replace some <filename> entries with <literallayout> so that docbook
  generates a non-fill block around them (only a few cases need this
  after the breaking points are added

Note that with normal prefixes (e.g. / or /usr/local) this won't happen.

The patch also fixes a wording in the watcher man page.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

One fix is necessary in gnt-cluster.sgml. Also adding “DELETE_ON_ERROR”
target to remove output file if an error occurred while building it (in
this case the manpage).

This was reported by Iustin Pop in issue 87 and proposed check method
taken from Lintian.
http://code.google.com/p/ganeti/issues/detail?id=87



Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

This patch adds an early_release parameter in the OpReplaceDisks and
OpEvacuateNode opcodes, allowing earlier release of storage and more
importantly of internal Ganeti locks.

The behaviour of the early release is that any locks and storage on all
secondary nodes are released early. This is valid for change secondary
(where we remove the storage on the old secondary, and release the locks
on the old and new secondary) and replace on secondary (where we remove
the old storage and release the lock on the secondary node.

Using this, on a three node setup:

- instance1 on nodes A:B
- instance2 on nodes C:B

It is possible to run in parallel a replace-disks -s (on secondary) for
instances 1 and 2.

Replace on primary will remove the storage, but not the locks, as we use
the primary node later in the LU to check consistency.

It is debatable whether to also remove the locks on the primary node,
and thus making replace-disks keep zero locks during the sync. While
this would allow greatly enhanced parallelism, let's first see how
removal of secondary locks works.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

The credit goes again to Lintian.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

The variable is called “IMPORT_INDEX”, not “IMPORT_IDX”.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

This patch updates the man page of gnt-instance to include the newly
added tags filtering.

Signed-off-by: René Nussbaumer <rn@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>
Signed-off-by: Iustin Pop <iustin@google.com>

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

This patch adds the 'cache' parameter for KVM; currently this is only
customisable at the hypervisor level, so it's the same for all drives
(except any CDROM image, which gets the default).

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

Clarify the fact that temporary HV/BE params in instance start override
and do not extend the configured parameters; and change the instance
list headers from HVM_* to * since many of the parameters apply to KVM
too. Also fix a typo in the rapi documention for '/2/nodes'.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

(1) Both the man page and the online help report the link and mode
fields, which are in the code called nic_link and nic_mode.
(2) Add missing fields to the online help.

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

This patch does multiple documentation updates for the new framework,
all pretty straightforward.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

This parameter will replace the direct use of KVM_MIGRATION_PORT and the
implicit use of the Xen migration port.

While it doesn't make sense to change this at instance level, we don't
have any other infrastructure for cluster-wide hypervisor parameters, so
we add it here (and document that it usually shouldn't be changed on a
per-instance basis).

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

Currently the repair storage has two issues:

- down instances are aborting the operation, even though they should be
  ignored (it's not technically possible to know their disk status
  unless we would activate their disks)
- if the VG is so broken that disks cannot be activated via gnt-instance
  activate-disks or gnt-instance startup, it's not possible to repair
  the VG at all

The patch makes the opcode skip down instances and also introduces an
``--ignore-consistency`` flag for forcing the execution of the LU.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

This patch unifies the query fields in the storage framework for all
types. Note that the information is still computed on-demand, so if e.g.
the used disk space is not requested for the ‘file’ type, it won't be
computed on nodes.

Summary of changes:
- improve the LVM storage type to support multiple lvm fields in the
  LIST_FIELDS declaration and constant (not-computed via lvm commands)
  fields
- rename utils.GetFilesystemFreeSpace to utils.GetFilesystemStats
  returning tuple of (total, free)
- add used and free as valid fields for lvm-vg (use being computed as
  vg_size-vg_free)
- make allocatable accepted for all types (ones which are always
  allocatable always return True)
- add a new list field ‘type’ that gives the current selected type; not
  much useful today (except for understanding what the default output
  is) but in the future might help if we want to list multiple types
- add type, size and allocatable to the default output field list
- update the man page with details on how, for file storage, size ≠ used
  + free for non-mountpoint cases

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

Our admin guide was very very trivial. This patch updates it to contain
advice on when to use which commands, removes the instance
administration part from the installation guide (moved to the admin
guide), and adds a walkthrough document that should be useable as a
starting point for new admins.

The patch also adds emacs variables to the documents, and rewraps some
which were not already at 72 chars.

The doc updates also show backwards-compatible commands for Ganeti 2.0,
as we don't have a good up-to-date 2.0 document and people might refer
to this set of documentation even when running that.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

To reduce confusion, the following gnt-node commands are renamed:

- physical-volumes → list-storage
- modify-volume → modify-storage
- repair-volume → repair-storage

The NEWS file is update accordingly and it also gets emacs local
variables.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

The format changed in the meantime and should be self-explanatory.

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

Allows the initialization of a cluster without the creation or distribution
of SSH key pairs. Includes changes for LeaveCluster and RPC.

Signed-off-by: Ken Wehr <ksw@google.com>
Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

This also clarifies the UUIDs NEWS entry.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Olivier Tharan <olive@google.com>

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Also corrects wrong indentation in the gnt-instance.sgml file.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

Currently this feature is hypervisor specific, but under kvm we use it
by default (aka: if the user hasn't specified another network script
which overrides our auto-generated one) to specify the routing table.
This was already hinted as a possibility in the manpages, but never
explicitely stated as a reality, so we update gnt-cluster(8) to actually
say this, and gnt-{backup,instance}(8) to point to gnt-cluster(8) for
more information.

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

It currently reports "cancel" in its syntax, which is obviously a
cut&paste error.

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

This patch extends gnt-debug to be able to submit multiple copies of the
input jobs and job contents, in order to simplify testing. It also adds
a timing mode, and splits the execution into separate submit and
execution stages (for timing purposes).

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Luca Bigliardi <shammash@google.com>

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

This uses the new LUMoveInstance. It supports only single-instance moves.

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>