GitLab

Add a mention into the install file, and provide a link to the official
DRBD documentation.
Signed-off-by: Hrvoje Ribicic <riba@google.com>
Reviewed-by: Petr Pudlak <pudlak@google.com>

http://downloads.ganeti.org is now the primary location for
obtaining ganeti release tar balls.
Signed-off-by: Klaus Aehlig <aehlig@google.com>
Reviewed-by: Helga Velroyen <helgav@google.com>

The options for the DRBD module should not be duplicated in the case the
procedure is run multiple times.
Signed-off-by: Petr Pudlak <pudlak@google.com>
Reviewed-by: Hrvoje Ribicic <riba@google.com>

In the example ensure that the DRBD options are always passed to the
module even if it's loaded before /etc/modules is processed.
Signed-off-by: Petr Pudlak <pudlak@google.com>
Reviewed-by: Hrvoje Ribicic <riba@google.com>

This patch adds a note to the KVM userspace access
documentation that the cluster init command should
be invoked after the general installation instructions
have been followed.
Signed-off-by: Helga Velroyen <helgav@google.com>
Reviewed-by: Jose Lopes <jabolopes@google.com>

This patch updates the supported DRBD version number to
8.4.
Signed-off-by: Helga Velroyen <helgav@google.com>
Reviewed-by: Hrvoje Ribicic <riba@google.com>

The installation manual used version 0.12, which had some bugs.
This patch updates it to the latest 0.14.
Signed-off-by: Petr Pudlak <pudlak@google.com>
Reviewed-by: Klaus Aehlig <aehlig@google.com>

Add support for the QEMU gluster: protocol. Also change the access
mode routines so they check the access parameter for all templates.
Signed-off-by: Santi Raffa <rsanti@google.com>
Signed-off-by: Thomas Thrainer <thomasth@google.com>
Reviewed-by: Thomas Thrainer <thomasth@google.com>

* Update NEWS file
* Update man page
* Update install.rst
Signed-off-by: Santi Raffa <rsanti@google.com>
Signed-off-by: Thomas Thrainer <thomasth@google.com>
Reviewed-by: Thomas Thrainer <thomasth@google.com>

Add an example logrotate snippet, along with the relevant documentation.
Signed-off-by: Apollon Oikonomopoulos <apoikos@gmail.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

Signed-off-by: Michele Tartara <mtartara@google.com>
Reviewed-by: Helga Velroyen <helgav@google.com>

In order to be able to use it as vif-script one has to
create a symbolic link inside /etc/xen/scripts pointing
to /usr/lib/ganeti/vif-ganeti and then add is a hypervisor
parameter.
Signed-off-by: Dimitris Aragiorgis <dimara@grnet.gr>
Signed-off-by: Thomas Thrainer <thomasth@google.com>
Reviewed-by: Thomas Thrainer <thomasth@google.com>

This part of the documentation refers to Grub instead of Grub2, but
Grub2 has been the standard boot loader since Squeeze. As this part only
(wrongly) repeats the preceeding documentation, it's removed completely.
Signed-off-by: Thomas Thrainer <thomasth@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

Based on user feedback the installation documentation is clarified and
extended.
Signed-off-by: Thomas Thrainer <thomasth@google.com>
Reviewed-by: Michele Tartara <mtartara@google.com>
(cherry picked from commit 3913eaa7)
Signed-off-by: Thomas Thrainer <thomasth@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

Based on user feedback the installation documentation is clarified and
extended.
Signed-off-by: Thomas Thrainer <thomasth@google.com>
Reviewed-by: Michele Tartara <mtartara@google.com>

- Remove mention of python 2.4 specific modules, as that version
  is not supported anymore
- Add bitarray and ipaddr
- Remove a double space
- Add mandatory C library packages too
- Mention the option of using drbd modules directly from your kernel

This also fixes Issue 372.
Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Helga Velroyen <helgav@google.com>

Signed-off-by: Sebastian Gebhard <sege@fs.ei.tum.de>
Signed-off-by: Klaus Aehlig <aehlig@google.com>
Reviewed-by: Klaus Aehlig <aehlig@google.com>

This is described in Issue 83.

Update both the install guide and the gnt-instance manpage.
In the install guide move another KVM specific example inside a new KVM
admonition for the hypervisor parameters section.
Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

- Include numbers in man page references
- Use “:manpage:” where appropriate
- Don't escape underscore in verbatim text (e.g. “``always_failover``)
  as it would show up in the generated man page
- Quote whole paths, not just build-time part
Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

This is a "better than nothing" support, just for kvm and just joining
the machine to the opevswitch bridge with the right command.
Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>
Reviewed-by: René Nussbaumer <rn@google.com>

Thanks to Faidon Liambotis for explaining this on the external IRC
channel.
Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Faidon Liambotis <paravoid@gmail.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

Add documentation and modify manpages for the RBD disk template.
Signed-off-by: Constantinos Venetsanopoulos <cven@grnet.gr>
Signed-off-by: Stratos Psomadakis <psomas@grnet.gr>
Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Signed-off-by: Andrea Spadaccini <spadaccio@google.com>
Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

The -g vg-name option was deprecated in commit
04367e70.
Signed-off-by: Andrea Spadaccini <spadaccio@google.com>
Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

This is related to issue 105.
Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

Use RFC 5737 IP addresses and RFC 2606 domain names in all
unittests, docs, qa and docstrings.
Signed-off-by: Manuel Franceschini <livewire@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

The 0.7 version was just an example, but since we're on 0.9 now,
updating the number cannot be wrong. The new admonition helps KVM users
to configure debootstrap correctly so that instances can be shutdown
cleanly.
Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

There were a few outdated options specified there. This patch unifies
the description under only one section, and updates it.
Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

As we know, those are just defaults, mostly chosen by replicating the
only behavior we supported before allowing customization. They may need
changes, to work in specific environments (which is why we introduced
them in the first place).

This tries to address issue 83, which was caused by the default
parameters not being correct for the target cluster.
Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

This patch does multiple documentation updates for the new framework,
all pretty straightforward.
Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Guido Trotter <ultrotter@google.com>

Our admin guide was very very trivial. This patch updates it to contain
advice on when to use which commands, removes the instance
administration part from the installation guide (moved to the admin
guide), and adds a walkthrough document that should be useable as a
starting point for new admins.

The patch also adds emacs variables to the documents, and rewraps some
which were not already at 72 chars.

The doc updates also show backwards-compatible commands for Ganeti 2.0,
as we don't have a good up-to-date 2.0 document and people might refer
to this set of documentation even when running that.
Signed-off-by: Iustin Pop <iustin@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Olivier Tharan <olive@google.com>

This addresses issue 75.
Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Signed-off-by: Michael Hanselmann <hansmi@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

The networking section is updated to talk about both routing and
bridging.
Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>

Currently the section is called "Installing Xen" and also mentions KVM.
Updating the title and also make it slightly less xen-centric.
Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Michael Hanselmann <hansmi@google.com>

The install guide asks the user to use the fqdn in the hostname, but
doesn't explain why. This has been asked multiple times, so adding an
explanation there.
Signed-off-by: Guido Trotter <ultrotter@google.com>
Reviewed-by: Iustin Pop <iustin@google.com>
Reviewed-by: Olivier Tharan <olive@google.com>