ganeti-os-interface.rst 11.3 KB
Newer Older
1 2 3 4 5 6 7 8 9 10 11
ganeti-os-interface(7) Ganeti | Version @GANETI_VERSION@


ganeti-os-interface - Specifications for guest OS types


12 13 14 15 16
The method of supporting guest operating systems in Ganeti is to have,
for each guest OS type, a directory containing a number of required
files. This directory must be present across all nodes (Ganeti doesn't
replicate it) in order for the OS to be usable by Ganeti.

17 18 19 20


There are eight required files: *create*, *import*, *export*, *rename*,
22 23
*verify* (executables), *ganeti_api_version*, *variants.list* and
*parameters.list* (text files).
24 25 26 27 28 29 30 31 32

Common environment

All commands will get their input via environment variables. A
common set of variables will be exported for all commands, and some
of them might have extra ones. Note that all counts are

Iustin Pop's avatar
Iustin Pop committed
33 34 35 36 37 38
Since Ganeti version 2.5, the environment will be cleaned up before
being passed to scripts, therefore they will not inherit the environment
in with which the ganeti node daemon was started. If you depend on any
environment variables (non-Ganeti), then you will need to define or
source them appropriately.

39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120
    The OS API version that the rest of the environment conforms to.

    The instance name the script should operate on.

    Both names point to the name of the instance's OS as Ganeti knows
    it. This can simplify the OS scripts by providing the same scripts
    under multiple names, and then the scripts can use this name to
    alter their behaviour.

    With OS API 15 changing the script behavior based on this variable
    is deprecated: OS_VARIANT should be used instead (see below).

    The variant of the OS which should be installed. Each OS must
    support all variants listed under its variants.list file, and may
    support more. Any more supported variants should be properly
    documented in the per-OS documentation.

    The hypervisor of this instance.

    The number of disks the instance has. The actual disk defitions are
    in a set of additional variables. The instance's disk will be
    numbered from 0 to this value minus one.

    The path to the storage for disk N of the instance. This might be
    either a block device or a regular file, in which case the OS
    scripts should use ``losetup`` (if they need to mount it). E.g. the
    first disk of the instance might be exported as

    This is how the hypervisor will export the instance disks: either
    read-write (``rw``) or read-only (``ro``).

    (Optional) If applicable to the current hypervisor type: the type
    of the device exported by the hypervisor. For example, the Xen HVM
    hypervisor can export disks as either ``paravirtual`` or

    How files are visible on the node side. This can be either
    ``block`` (when using block devices) or ``file:type``, where
    ``type`` is either ``loop`` or ``blktap`` depending on how the
    hypervisor will be configured.  Note that not all backend types
    apply to all hypervisors.

    Similar to the ``DISK_COUNT``, this represents the number of NICs
    of the instance.

    The MAC address associated with this interface.

    The IP address, if any, associated with the N-th NIC of the

    The NIC mode, either routed or bridged

    The bridge to which this NIC will be attached. This variable is
    defined only when the NIC is in bridged mode.

    If the NIC is in bridged mode, this is the same as
    ``NIC_%N_BRIDGE``.  If it is in routed mode, the routing table
    which will be used by the hypervisor to insert the appropriate

    (Optional) If applicable, the type of the exported NIC to the
    instance, this can be one of: ``rtl8139``, ``ne2k_pci``,
    ``ne2k_isa``, ``paravirtual``.

121 122
    Each OS parameter (see below) will be exported in its own
    variable, prefixed with ``OSP_``, and upper-cased. For example, a
124 125
    ``dhcp`` parameter will be exported as ``OSP_DHCP``.

126 127 128 129 130 131
    If non-zero, this should cause the OS script to generate verbose
    logs of its execution, for troubleshooting purposes. Currently
    only ``0`` and ``1`` are valid values.

132 133 134 135

136 137 138 139 140 141 142 143 144 145 146 147 148 149

The **create** command is used for creating a new instance from
scratch. It has no additional environment variables bside the
common ones.

The ``INSTANCE_NAME`` variable denotes the name of the instance,
which is guaranteed to resolve to an IP address. The create script
should configure the instance according to this name. It can
configure the IP statically or not, depending on the deployment

The ``INSTANCE_REINSTALL`` variable is set to ``1`` when this create
request is reinstalling an existing instance, rather than creating
151 152 153 154 155 156 157 158 159 160 161 162 163 164
one anew. This can be used, for example, to preserve some data in the
old instance in an OS-specific way.


This command is used in order to make a backup of a given disk of
the instance. The command should write to stdout a dump of the
given block device. The output of this program will be passed
during restore to the **import** command.

The specific disk to backup is denoted by two additional environment
variables: ``EXPORT_INDEX`` which denotes the index in the instance
disks structure (and could be used for example to skip the second disk
165 166
if not needed for backup) and ``EXPORT_DEVICE`` which has the same value
as ``DISK_N_PATH`` but is duplicated here for easier usage by shell
167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187
scripts (rather than parse the ``DISK_...`` variables).

To provide the user with an estimate on how long the export will take,
a predicted size can be written to the file descriptor passed in the
variable ``EXP_SIZE_FD``. The value is in bytes and must be terminated
by a newline character (``\n``). Older versions of Ganeti don't
support this feature, hence the variable should be checked before
use. Example::

    if test -n "$EXP_SIZE_FD"; then
      blockdev --getsize64 $blockdev >&$EXP_SIZE_FD


The **import** command is used for restoring an instance from a
backup as done by **export**. The arguments are the similar to
those passed to **export**, whose output will be provided on

The difference in variables is that the current disk is denoted by
189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212
``IMPORT_DEVICE`` and ``IMPORT_INDEX`` (instead of ``EXPORT_...``).


This command is used in order to perform a rename at the instance
OS level, after the instance has been renamed in Ganeti. The
command should do whatever steps are required to ensure that the
instance is updated to use the new name, if the operating system
supports it.

Note that it is acceptable for the rename script to do nothing at
all, however be warned that in this case, there will be a
desynchronization between what gnt-instance list shows you and the
actual hostname of the instance.

The script will be passed one additional environment variable
called ``OLD_INSTANCE_NAME`` which holds the old instance name. The
``INSTANCE_NAME`` variable holds the new instance name.

A very simple rename script should at least change the hostname and
IP address of the instance, leaving the administrator to update the
other services.

213 214 215 216 217 218 219 220 221 222

The *verify* script is used to verify consistency of the OS parameters
(see below). The command should take one or more arguments denoting
what checks should be performed, and return a proper exit code
depending on whether the validation failed or succeeded.

Currently (API version 20), only one parameter is supported:
``parameters``. This should validate the ``OSP_`` variables from the
environment, and output diagnostic messages in case the validation
224 225 226 227 228 229 230 231 232 233

.. highlight:: sh

For the ``dhcp`` parameter given as example above, a verification
script could be::


    case $OSP_DHCP in
234 235 236 237 238 239
        echo "Invalid value '$OSP_DHCP' for the dhcp parameter" 1>&2
        exit 1;
240 241 242 243 244 245 246 247 248

    exit 0


249 250 251 252 253

The ganeti_api_version file is a plain text file containing the
version(s) of the guest OS API that this OS definition complies
254 255
with, one per line. The version documented by this man page is 20,
so this file must contain the number 20 followed by a newline if
256 257
only this version is supported. A script compatible with more than
one Ganeti version should contain the most recent version first
258 259
(i.e. 20), followed by the old version(s) (in this case 15 and/or
260 261 262 263


264 265 266
variants.list is a plain text file containing all the declared supported
variants for this OS, one per line. If this file is missing or empty,
then the OS won't be considered to support variants.

268 269 270 271 272 273 274 275 276 277 278 279 280

This file declares the parameters supported by the OS, one parameter
per line, with name and description (space and/or tab separated). For

    dhcp Whether to enable (yes) or disable (no) dhcp
    root_size The size of the root partition, in GiB

The parameters can then be used in instance add or modification, as

    # gnt-instance add -O dhcp=no,root_size=8 ...
282 283

284 285 286 287 288 289

Backwards compatibility

Ganeti 2.3 and up is compatible with API versions 10, 15 and 20. The OS
291 292 293
parameters and related scripts (verify) are only supported in
version 20. The variants functionality (variants.list, and OS_VARIANT
env. var) are supported/present only in version 15 and up.
294 295 296 297 298 299 300 301 302 303 304

Common behaviour

All the scripts should display an usage message when called with a
wrong number of arguments or when the first argument is ``-h`` or

Upgrading from old versions

305 306 307 308 309 310 311
Version 15 to 20

The ``parameters.list`` file and ``verify`` script have been
added. For no parameters, an empty parameters file and an empty verify
script which returns success can be used.

312 313 314 315 316
Version 10 to 15

The ``variants.list`` file has been added, so OSes should support at
least one variant, declaring it in that file and must be prepared to
317 318 319
parse the OS_VARIANT environment variable. OSes are free to support more
variants than just the declared ones. Note that this file is optional;
without it, the variants functionality is disabled.
320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347

Version 5 to 10

The method for passing data has changed from command line options
to environment variables, so scripts should be modified to use
these. For an example of how this can be done in a way compatible
with both versions, feel free to look at the debootstrap instance's auxiliary script.

Also, instances can have now a variable number of disks, not only
two, and a variable number of NICs (instead of fixed one), so the
scripts should deal with this. The biggest change is in the
import/export, which are called once per disk, instead of once per

Version 4 to 5

The rename script has been added. If you don't want to do any
changes on the instances after a rename, you can migrate the OS
definition to version 5 by creating the rename script simply as::


    exit 0

Note that the script must be executable.
348 349 350 351 352 353

.. vim: set textwidth=72 :
.. Local Variables:
.. mode: rst
.. fill-column: 72
.. End: